Technical Parameters:

Mill motor power: P=7.5KW HD750

Horizontal milling speed: 100-800mm/min VFD by inverter

Horizontal slides idle speed: 1200mm/min

Milling head vertical speed: 100-800mm/min VFD by inverter

Horizontal feeding motor power: 1.5Kw

Vertical motor power: 2.2Kw

Spindle speed of milling head: 75-420rpm, in six steps, adjust by outside hand wheel. (Note: this is an updated model to avoid opening gearbox and changing gears inside to change speed)

Milling head range: 0-45dgr

Milling cutter seat size: Φ125-250mm

Milling spindle stroke: L=100mm

Milling spindle diameter: Φ128.57mm

Milling head taper hole: NT50

Ambient temperature: –10ºC ~ 40 ºC

Relative humidity:Max. monthly average relative humidity is 90%

Electricity power:Voltage fluctuation (under rated frequency) ≤±10%

Frequency fluctuation (under rated voltage) ≤±2%

Performance:

The machine is composed of milling head, column, machine body, mechanical feeding system, control system, guard unit of rail, milling-blade, etc;

Both the horizontal and vertical rails are precise type, of great loading capacity, small clearance and good accuracy;

The milling head can travel along spindle as100mm stroke;

The machine is equipped with operating pedant, easy for operation and blade alignment;

The vertical rail is protected from dust and scrap due to designed guard cover;

For guarding unit of horizontal rail, it is a cascading style, with the advantage of good seal, no dissipation and long life. There is a peep hole on the guard cover, thru which lubricating and cleanness condition of the rail can be seen;

The machine body and column are welding structure, and integrally annealed after welding to offer stable, non-deform and good precession;

The milling head is produced by professional manufacturer, featuring in reasonable structure, reliable performance, broad speed range, good rigidity, low noise, high efficiency and easy operation. Rpm of milling head can be adjusted by manual based on diameter of milling-blade seat;

The milling head can be turned integrally within the range of 0~45º in the vertical slides, for ease of beveling. This is an our unique feature;

There is manual lubricating pump on the horizontal slides, offering good lubrication to the rail;

The milling-blade bed of the machine is a standard type, which is available on the market. The blade is made of carbide alloy steel;

Range of supply:

Column including: milling head (7.5kW), vertical slides, column body, elevating transmission mechanism, guard cover;

Horizontal slides including: work table, machine body, feeding transmission system, guard cover;

Control system including: control board, operating pedant, A.C. inverter

Tool for fitting miiling-blade including: pull rod, mandrill, 160 standart milling-blade seat, fitting tool, etc;

Operation manual (including foundation drawing, electrical diagram, hydraulic diagram)

User made part:

a. foundation(the seller provide drawings).

b. Earth (L) bolts and expansion bolts.