HACH 2100Q Portable Turbidimeter
Description:
The 2100Q Portable Turbidimeter is ideal for use in the field or around the plant. It is easy to carry around and take multiple measurements from various collection points in your treatment process. With its intuitive user interface, the 2100Q makes it easy to take measurements and perform calibration and verification. Storing and transferring data from a portable turbidimeter has never been easier.
There is also an optional USB+Power module for the 2100Q Portable Turbidimeter, which allows you to transfer your data directly to a computer.
Specification:
Measurement Method: Ratio turbidimetric determination using a primary nephelometric light scatter signal (90) to the transmitted light scatter signal.
Regulatory: Meets EPA Method 180.1
Light Source: Tungsten filament lamp
Range: 0 to 1000 NTU (FNU)
Accuracy: ±% of reading plus stray light from 0 to 1000 NTU
Repeatability: ±1% of reading, or 0.01 NTU (FNU), whichever is greater
Resolution: 0.01 NTU on lowest range
Stray Light:< 0.02 NTU (FNU)
Signal Averaging: Selectable on/off
Detector: Silicon photovoltaic
Reading Modes (user selectable): Normal (Push to Read); Signal Averaging; Rapidly Settling Turbidity
Data Logger: 500 records
Power Requirement: 110-230 VAC, 50/60 Hz (with Power or USB+Power module Optional ); 4 AA alkaline batteries; Rechargeable NiMH (for use with USB+Power module Optional )
Operating Conditions: Temperature: 0 to 50 C (32 to 122 F);
Relative Humidity: 0 to 90% @ 30 C, 0 to 80% @ 40 C, 0 to 70% @ 50 C, non-condensing
Storage Conditions: -40 to 60 C (-40 to 140 F), instrument only
Interface: Optional USB
Instrument Enclosure Rating: IP67 (closed lid, battery compartment excluded)
Protection Class: Power Supply: Class II
Certification: CE certified
Sample Required: 10mL (0.3 oz.)
Sample Cells: 60mm x 25mm (2.36″ x 1″) borosilicate glass with screw cap
Dimensions: 22.9cm x 10.7cm x 7.7cm (9.0″ x 4.2″ x 3.0″)
Weight: 527g (1.16 lb.) without batteries; 618g (1.36 lb.) with four AA alkaline batteries