Full Duplex 14-16km Drone Ethernet and Bi-directional Data Links
The FNM-8416 is a compact, lightweight L-band wireless radio transceiver that is designed for integration into small and medium UAVs.
Featuring RF connectors for external antennas as well as Ethernet and serial interfaces, the ultra-low weight transceiver with advanced electronic beam-forming provides end-to-end IP connectivity for efficient integration, interoperability and seamless data exchange. The unit provides AES-256 hardware encryption.
Main Features:
* Radio module for integration in
– Unmanned vehicles
– Portable solutions
* L-band phased array tactical wireless radio
* IP centric/ad hoc network operations
* AES-256 link encryption hardware
* Unmatched bandwidth and range
* Field proven
* Low weight
* Easy to install and operate
Application:
As its miniature volume, precision design, lightweight and easy to carry, it’s suitably used in short distance and long range air high speed wireless video data transmission purposes. Such as UAV, rotorcraft, micro UAV, drone, UGV, unmanned powered parachute, unmanned underwater vehicles boats, fire-fighting robot, unmanned ship, airship, USV, high iron, EMU, unmanned vehicles, unmanned vehicle and more.
Data transmission.
Specification
Specifications | ||
Frequency | 800Mhz | 806~826 MHz |
1.4Ghz | 1428~1448 MHz | |
Bandwidth | 8MHz | |
RF Power | 0.6watt (Bi-Amp, 0.6watt Peak Power of each power amplifier) | |
Transmit Range | 800Mhz: 16km 1400Mhz: 14km | |
Transmit Rate | 6Mbps (Video Stream, Ethernet Signal and serial data share) The best video stream: 2.5Mbps | |
Baud Rate | 115200bps(Adjustable) | |
Rx Sensitivity | -104/-99dbm | |
Fault Tolerance Algorithm | Wireless base band FEC forward error correction | |
Video Latency | The video not be compressed. No latency | |
Link Rebuild Time | <1s | |
Modulation | Uplink QNSK/Downlink QNSK | |
Encryption | AES128 | |
Start Time | 15s | |
Power | DC-12V (7~18V) | |
Interface | Interfaces on Tx and Rx are same Video input/Output: Ethernet×3 Power Input Interface×1 Antenna Interface: SMA×2 Serial×1: (Voltage:±13V(RS232), 0~3.3V(TTL) | |
Indicators | Power Ethernet Status Indicator Wireless Connection Setup Indicator x 3 | |
Power Consumption | Tx: 5W Rx: 3.5W | |
Temperature | Working: -40 ~+ 85℃ Storage: -55 ~+85℃ | |
Dimension | Tx/Rx: 57 x 55.5 x 15.7 mm | |
Weight | Tx/Rx: 65g | |
Design | CNC Technology | |
Double Aluminum Alloy Shell | ||
Conductive anodizing craft |
Full Duplex Wireless Data COFDM Transmitter Zero Delay Nlos 2km Low Consumption