Brief introduction of overhead traveling crane with bucket:
The grab crab has switching mechanism and lifting mechanism. The waste grab are separately hung over the switching mechanism and lifting mechanism with four steel wire ropes. The switching mechanism drives the grab to close to grab materials. When the grab is closed,the lifting mechanism shall be started immediately to hoist the four evenly loaded steel wire ropes. Discharging only needs to start the switching mechanism,which opens the grab to pour material.
Except the lifting mechanism,the crane is basically the same as the bridge crane with hook.
This product is widely used in metallurgy,mining,steel,construction,coal,rails,power plant,oil,ports,wood,papermaking,brewing,garbage power generation,garbage transit and other industrials,for bridge type and gantry crane supporting the various using.
Control methods:Remote control or pendent line with push button or cabin control,
Painting:Primer and finishing paint,color:according to your requirements,
Working conditions:1.Working temperature:-25-40C degree,2,Power source:3phase 380V 50HZ or as customer requirements.
Pictures of overhead traveling crane with bucket:
All kinds of overhead traveling crane with bucket:
Order Notice of overhead traveling crane with bucket:
Pls kindly inform us the following details while you send the inquiry:
1.What is the lifting capacity?
2.What is the span length ?(Span=distance between center of two rails)
3.What is the lifting height?(Lifting height=Distance from hook to ground)
4.What is the size of the grab?
5.Where will you to lift what kinds of materials?
6.What is your power supply?
7.Is there any other special requirements?
Service we can provide
1.Payment terms is flexible,
2.Design the crane according to your technical request,
3.Delivery on time,
4.Our engineer can arrive to the installation site to help fixing the crane for you,
5.Diversity products,
6.Warranty:12 months
Factory view of overhead traveling crane with bucket: