UCP206-17
UCP206-17has a combination of a cast iron pillow block housing with an anti-rotation device with self-alignment and a set screw locking chrome steel insert bearing with a slinger seal design. This specific unit is a standard duty pillow block bearing with a wide inner ring and two set screws and a cast iron unit with the standard base to center height with a grease fitting.
UCP200 Series Pillow Block Bearingis equipped with two specifically designed set screws that are positioned in the inner ring of the ball bearing to lock and attach to the shaft.
- Also available with eccentric locking collar.
- Medium Duty, Heavy Duty and other available types are described in the Bearing Types information.
- Various seal options and plated housing options are described in the Nomenclature and Bearing Types information.
Attributes | Values |
Units | mm |
Bearing Type | Extended inner race with set screws |
Dynamic Load Rating (Cr) | 19,413 |
Static Load Rating (Cor) | 11,277 |
Shaft Dia. (Fw) | 30.0000 |
Shaft Height (h) | 42.9000 |
Housing Width (b) | 48.0000 |
Mounting Hole Center-to-Center (e) | 121.0000 |
Housing Length (a) | 165.0000 |
Mounting Slot Length (S2) | 21.0000 |
Mounting Slot Width (S1) | 17.0000 |
Housing Base Thickness (g) | 15.0000 |
Housing Height (w) | 84.0000 |
Bearing Inner Race Width (Bi) | 38.1000 |
Bearing Inner Race Width - Short Side (n) | 15.9000 |
Bearing Inner Race Width - Extended Side (m) | 22.2000 |
Mounting Bolt Size | 14.0000 |
Bearing Number | UCP 206 |
Housing Number | P 206 |
Shaft Dia., Nominal (d) | 30.0000 |
Weight (g) | 1,315.00 |
Material | Cast iron housing, chrome steel bearing
|