5 - 17 Inch Water Well Drilling Tools Step Drag Bit For Wild Range Drilling

Application

Other than PDC bits, Drag Bits have the lowest cost per bit. Drag bits are a rotary drill bit built with a steel body and tungsten carbide teeth. These bits will out preform other more expensive bits if used appropriately. Drag bits are extremely popular choice for seismic drilling, blast hole drilling and geothermal drilling applications. For best results adjust the rotational speed to 50% less than what you would normally use for a tricone bit of the same size and reduce the weight on bit by the same amount.

Our Drag Bits Range in size from 3-5/8”(92mm) to 12 1/4″(311.2mm) with a 7 5/8″ API REG PIN

action when rotated. They are comparatively inexpensive due to the lack of moving parts and they can penetrate softer formations such as stiff clays and mudstones very quickly.The drag bit usually used in very soft to medium formation when the dth hammer as the tricone bit, lose of their effectiveness.The cleaning of the hole is realized by the injection of air or water.

Characteristics

1. Drag bits are made according to API standard or NROD thread standard or others.
2. Various step and chevron drag bits are available from 3 inch to 24 inch.
3. There is very good feedback because of the quality and price.
4. Different drag bits can be made according to your drawings or samples.

Specification

Packing& Delivery

FAQ
1. Shipping time for an order
We have many stock. As usual, we can delivery the goods as soon as we get the full payment.
2. Quality Control
Strict inspection and testing for every order before shipping out .
3. How can we trust your company?
We support Alibaba trade insurance. Protect products quality, shipment on time and your covered amount.
4. After Sales Service
Free replacement will provide once the failure confirmed caused by our product quality.