Sanitary Mechanical Homogenizer Machine For Pharmaceutical , Fine Chemicals

Mechanical Homogenizer Feature:

This machine are features with good design,convenient operation and simple maintenance,and safety.
1) Low noise:Noise of transmission is lower than noise of motor. The pointer of pressure meter is steady, and also the range of swing of pointer is less than 2M Pa.
2) Smashing granularity is between 0.1 micron to 0.2 micron, and their average size≤1 micron.
3) Sealing material can work under less than 150ºC, and the parts touching material is made of stainless steel which can stay up to the acid and alkali. All of valves and plungers are made of special material, so they are durable and inexpensive. The bearing is also durable because it is made of special alloy material, which is the more friction, the more hardness.
4) Lubrication of homogenizers is credible, and it only need changing oil the first time when work 800 hours to 1000 hours, since then it need to be changed oil per year later
5) The higher the pressure the finer the material the more uniform particle size, 30MPA the following models, mainly for liquid - liquid emulsification. Pressure of 30MPA above, on the liquid - solid dispersion of liquid into play when the pressure most of the material up to 60MPA reach 2μm particle size less than when the material reaches 80MPA more obvious when the role is mainly used for ultrafine particles broken Materials to achieve the following general 1μm. As to 100MPA above, can be produced more subtle particles, some of the material particles after repeated high pressure homogenization, 0.1-0.5μm can be prepared the following no-grain materials.

Mechanical Homogenizer Main technical parameters:

Mechanical Homogenizer Applications:

1.Chemical

Disinfectants, emulsifiers, fuel oil, insecticides, oants, oil emulsions, silicone emulsions, wax emulsions, lubricants, resins/rosins, latex, viscosity Improvers.

2.Pharmaceutical

Antibiotics, skin cream, intravenous, emulsion, ointments, tablet coatings, lipostiomes

3.Cosmetics

Hair products, skin creams, lotions, perfumes, shampoos and conditioners.

Types of Homogenizer:

1.Manual Operating Homogenizer

Two- stage homogenizer system with manual pressure adjustment is easy to use. It is your economic choice.

2.Hydraulic Operating Homogenizer

The hydraulic control system is developed to adjust the homogenizer pressure, and it is easy to upgrade to remote control system by changing to Proportional valves.

3.Pneumatic Operating Homogenizer

The pneumatic control system is developed for the homogenizer, and it is easy to upgrade to remote control.

4.Large Capacity Homogenizer

This machine has five plungers with the maximum flow reaching 30000L/H. The hydraulic end adopts the split structure which facilitates assembly and disassembly. The pressure adjustment can adopt manual or hydraulic mode.

5.Laboratory Homogenizer

Capacity: 60L/H Max Pressure</=70MPa

Minimum Sample Volume: 200ml