Automatic circulation system coal fired moving grate thermal oil furnace manufacturer
YLW series horizontal coal-fired heat thermal oil furnace manufacturer
1. YLW series horizontal heat conduction oil furnace uses coal, waste wood and biomass as fuel, and heat transfer oil as medium. The hot oil circulation oil pump is used to force the liquid phase circulation of the medium, and the heat energy is transferred to the heat equipment, and then return. The furnace is reheated, with industrial equipment that achieves higher operating temperatures at lower pressures and enables high-precision control of media operation.
2. The system has high heat utilization rate and convenient operation and maintenance. It is an ideal heating equipment for safety, high efficiency and energy saving.
Thermal oil furnace manufacturer Features
1. The overall design of the equipment is heat transfer uniform, and the rated process temperature can be obtained very accurately.
2. The heat transfer oil furnace can obtain a higher working temperature at a lower operating pressure.
3. The heat transfer oil furnace uses a liquid phase forced circulation heating mode, and there is no heat loss from condensing discharge and exhaust gas emission, so the combustion efficiency of the entire heating system is very high.
4. In response to the influence of temperature fluctuation and heat change on the volume of the working medium, the company specially designed compensation measures inside the boiler to minimize heat loss.
5. Before circulating heat, there are strict technical measures to control the air, moisture or other content in the working medium.
VERTICAL YGL HAND FEED COAL/WOOD FIRED thermal oil furnace manufacturer DATA SHEET
Model data | YGL-120MA | YGL-240MA | YGL-350MA | YGL-500MA | YGL-700MA | YGL-1000MA | YGL-1200MA | YGL-1400MA | |
Rated thermal power Kw | 120 | 240 | 350 | 500 | 700 | 1000 | 1200 | 1400 | |
Thermal efficiency% | 73 | 73 | 73 | 73 | 73 | 73 | 73 | 73 | |
Design pressure Mpa | 0.6 | 0.6 | 0.6 | 0.6 | 0.6 | 0.6 | 0.6 | 0.6 | |
Medium higher temperature °C | 320 | 320 | 320 | 320 | 320 | 320 | 320 | 320 | |
Cycle oil m3/h | 12.5 | 20 | 40 | 60 | 80 | 100 | 100 | 100 | |
Piping connection diameter DN | 50 | 80 | 80 | 100 | 100 | 125 | 125 | 125 | |
Full system installed capacity Kw | 8 | 10 | 18 | 122 | 25 | 35 | 35 | 35 | |
Coal burning type | Ⅱ,Ⅲ soft coal,BIOMASS PELLET | ||||||||
Coal weight Kg/h | 28 | 56 | 80 | 100 | 155 | 185 | 240 | 290 | |
Boiler Size | Diameter mm | 1215 | 1500 | 1700 | 1700 | 1960 | 2050 | 2160 | 2290 |
Height mm | 2310 | 2750 | 3060 | 3475 | 3805 | 4415 | 4760 | 5445 | |
Total weight Kg | 2500 | 3200 | 4800 | 5300 | 5800 | 6200 | 6700 | 7300 |
VERTICAL YLL TYPE CHAIN GRATE AUTOMATIC COAL FEEDER THERMAL OIL HEATER DATA SHEET
Model data | YLL-700MA | YLL-1000MA | YLL-1200MA | YLL-1400MA | YLL-2000MA | YLL-2800MA | |
Rated thermal power Kw | 700 | 1000 | 1200 | 1400 | 2000 | 2800 | |
Thermal efficiency% | 92 | ||||||
Design pressure Mpa | 1 | ||||||
Medium higher temperature °C | 350 | ||||||
Cycle oil m3/h | 60 | 80 | 100 | 100 | 160 | 180 | |
Piping connection diameter DN | 100 | 100 | 125 | 125 | 150 | 150 | |
Full system installed capacity Kw | 25.9 | 31.5 | 43.45 | 43.45 | 62.75 | 70 | |
Coal burning type | Ⅱ,Ⅲ soft coal,BIOMASS PELLET | ||||||
Coal weight Kg/h | 145 | 180 | 225 | 270 | 392 | 535 | |
Boiler Size | L mm | 4710 | 4710 | 4710 | 4710 | 5830 | 6390 |
W mm | 2080 | 2170 | 2280 | 2280 | 2450 | 2870 | |
H mm | 4033 | 4608 | 4855 | 5430 | 5826 | 3450 | |
Total weight Kg | 10886 | 11812 | 12980 | 13935 | 21680 | 28000 |
YLW HORIZONTAL CHAIN GRATE TYPE thermal oil furnace manufacturer DATA SHEET
project | Unit | YLW-1400MA | YLW-2000MA | YLW-2400MA | YLW-3000MA |
(120*104Kcal) | (170*104Kcal) | (200*104Kcal) | (258*104Kcal) | ||
Rated thermal power | KW | 1400 | 2000 | 2400 | 3000 |
Thermal efficiency | % | ≥73 | ≥73 | ≥73 | ≥73 |
design pressure | Mpa | 1.1 | 1.1 | 1.1 | 1.1 |
Medium maximum temperature | ℃ | 320 | 320 | 320 | 320 |
Circulating oil | m3/h | 100 | 160 | 180 | 200 |
Piping connection caliber | DN | 125 | 150 | 150 | 150 |
Full system installed capacity | KW | 49.5 | 75 | 75 | 87 |
Fuel type | MA | MA | MA | MA | |
Coal consumption | kg/h | 300 | 400 | 470 | 565 |
Dimensions (length * width * height) | mm | 4703*2270*4300 | 5820*2270*3950 | 5820*2270*4259 | 6790*2270*4395 |
total weight | kg | 20500 | 21500 | 24600 | 33760 |