New design Automatically Coconut Shell Fuel DZL 3 - 1.25 - SC Biomass Fired Steam Boiler For Wood Factory
Coconut Shell Fuel DZL 3 - 1.25 - SC Biomass Fired Steam Boiler Characteristics
1. DZL 3 - 1.25 - SC Biomass Fired Steam Boiler Suitable for combustion shaped biomass fuel, pure coal or dual fuel.
2. With a draft fan for mechanical ventilation
3. Equipped with scraper slag remover, or spiral slag discharge machine to achieve mechanical slagging
4. The control and monitoring instruments are complete, and the boiler operation is safe and reliable.
Coconut Shell Fuel DZL 3 - 1.25 - SC Biomass Fired Steam Boiler Datasheet:
Boiler model: DZL3-1.25-SC
Boiler capacity output :3ton/h,3000kg/hr,200HP
Boiler Pressure:1.25Mpa
Radiation heating area:11.2m2
Convection heating area:67.74m2
The heating area of the economizer:43.6m2
Effective grate area:4.41m2
Fuel consumption:546.32kg/h
Feed temperature:20℃
Exhaust temperature:142.87℃
Design efficiency:83.27%
Boiler water capacity:7.27
Water test pressure:1.65Mpa
The chimney:φ400X35000MM
Design of fuel: biomass, Coconut shell, wood chips
3 ton Boiler bulk transport weight:19.5tons
Coconut Shell Fuel DZL 3 - 1.25 - SC Biomass Fired Steam Boiler Competitive Advantage:
1. Drum layout from top to bottom is compact and uniform heating. The water wall design with a membrane wall. It will prevent boiler furnace heat loss effectively
2. Water cycle structure increases heated areas and improves the water cycle effects, especially improve the DZL 3 - 1.25 - SC Biomass Fired Steam Boiler thermal efficiency.
3. Two parts assemble on customer site finally, which short the installation work and low the installation costs.
4. Body adopts the dual-rear-drum vertical structure, full layout heating surface and high thermal efficiency.
5. Mechanization combustion, environmental protection and energy conservation.
6. Auxiliary equipment, controlled panel PLC with a high level
7. Body and base use two pieces to leave the factory, installed in a short period and low installation costs.
8. DZL 3 - 1.25 - SC Biomass Fired Steam Boiler evaporation capacity is 3000kg/h, design pressure is 1.25 to 2.5Mpa and thermal power is 7MW.
Quickly installed boiler | |||||
boiler model | Unit | DZL1-0.7/1.0-AII | DZL2-0.7/1.0-AII | DZL4-0.7/1.25/1.6-AII | DZL6-1.25/1.6-AII |
capacity | ton/h | 1 | 2 | 4 | 6 |
rated pressure | Mpa | 0.7/1.0 | 0.7/1.0 | 0.7/1.25/1.6 | 1.25/1.6 |
rated steam temperature | ℃ | 170/184 | 170/184 | 184/193/204 | 193/204 |
feed water temperature | ℃ | 20 | 20 | 20 | 105 |
radiation area | ㎡ | 4.21 | 6.43 | 10.55 | 16.95 |
convection area | ㎡ | 20.68 | 39.23 | 90.45 | 134.87 |
economizer area | ㎡ | 9.66 | 16.56 | 16.56 | 53.13 |
valid grate area | ㎡ | 1.852 | 3.15 | 5.18 | 8.395 |
applicable fuel | * | COAL | COAL | COAL | COAL |
exhaust gas temperature | ℃ | 152/160 | 152/161 | 163/163.8/169.5 | 163/169 |
design efficiency | % | 77.73/77.24 | 78.53/78.18 | 79.37/79.30/78.96 | 79.83/79.19 |
fuel consumption | kg/h | 170.74/172.93 | 341.71/343.63 | 673.22/676.27/682.11 | 866.39/877.51 |
max part size for delivery | mm | 5488*2254*2782 | 5694*2704*3324 | 6743*2954*3508 | 8244*2951*3704 |
Dear friend,
Thanks for your time for scanning our products.
We need the following information to confirm the boiler model:
1.Boiler type: steam boiler, hot water boiler or thermal oil boiler?
2.Boiler capacity?
3. Boiler pressure?
4. Boiler application?
After confirming these questions, we will know exactly what boiler will be suitable for you and we will provide you our product details and quotation. Thank u.
It is ok to copy the question and answers directly when sending us the inquiry!
Welcome you any time!
Ms.Betty