This is a relatively simple process, When selecting clones from the mother plant, look for branches with four or more nodes, or points in a branch where new leaves appear. Professional recommendations on proper branch length for cutting range from 4 to 16 inches, or 10.16 to 40.64 cm.
Once you've successfully made all of your cuttings, dip them in your rooting gel and gently place them into a medium. If you're using a rockwool cube, do not put the clone into the hole. Instead, use the cutting to pierce the cube. Doing so will ensure that no light hits the roots, and that the cutting gets maximum coverage. Prior to producing roots, clones require a high level of humidity. Place the cutting into a cloning dome and keep the humidity between 75-90% until their roots are capable of intaking water. Roots should begin to form within 7-14 days, and signal that the clones are
ready to be planted.
Model # | SSBL1200-VEG/BLM | ||||
Optical Spec. | Qty of LED | 210 ~ 240pcs (VEG & BLM) | |||
Color ratio | R/G/B/W | ||||
Beam angle | 120 degree | ||||
PPFD(Ref.) | Height of fixture to the plant | PPFD (μmol·m-2·s-1) | |||
Position | P1 | P2 | P3 | ||
30cm | 220 | 190 | 170 | ||
20cm | 270 | 255 | 220 | ||
10cm | 320 | 300 | 275 | ||
Power Spec. | Actual power rating | 36 W (±5%) | |||
Input | 85-265V/50-60Hz | ||||
Product Spec. | Product dimension | 1205×32×32(mm) | |||
Net weight | 0.75kgs/pcs | ||||
Material | High purity aluminum | ||||
IP rating | IP65 | ||||
Heat-dissipation | Passive cooling | ||||
Installation | Hanging or Fixing installation | ||||
Warranty | 3 years |
FAQ