Ultra-Thin Model Nice Design 2 Inch PLC Control Systerm 300 Pieces/Hour With/Without Fast Change Moulds Tools Hydraulic Hose Pressing Machine Hydraulic Fitting Press Big Elbow

FY-CBK-51B DECRIPTION

Ultra-Thin Hydraulic Hose Pressing Machine with PLC Control System

Introducing our Ultra-Thin Hydraulic Hose Pressing Machine, designed for modern efficiency and exceptional performance. Key features include:

• 2 Inch Capacity: Capable of crimping hoses up to 2 inches, suitable for a wide range of hydraulic applications.
• High Production Rate of 300 Pieces/Hour: Optimized for speed, significantly enhancing your operational output.
• Advanced PLC Control System: Provides precise control and easy programming, ensuring accurate crimping every time.
• Fast Change Mould Tools Optional: Available with or without quick-change moulds, allowing for flexible adjustments between different fitting sizes.

This machine is ideal for professionals in the hydraulic industry, combining a sleek design with high functionality. Elevate your production capabilities with this cutting-edge hose pressing machine today!

Precautions before operation
1. When using the tube press for the first time, it should be crimped 20 to 30 times without load, and it can be used after observing that all parts are normal.
2. When using the pipe press in winter, it should be withheld for 20 to 30 times without load to increase the oil temperature.
3. Press the open button, after the mold base is opened, select the corresponding mold to install on the mold base according to the specifications of the hose to be crimped, and adjust the micrometer scale (see the crimping parameter table for details).
4. Place the hose with the joint in the proper position in the press head, so that the entire length is crimped at one time.
5. Press the crimping button to execute crimping operation, until the crimping head stops crimping and automatically opens the mold.
6. Take out the crimped hose assembly and use a vernier caliper to check the outer diameter of the crimped joint jacket. If it does not match the parameter table, fine-tune the micrometer scale until the crimping of the next hose meets the requirements.

TECHNICAL DATA

NOTE

- Customized die sets are available;

- Special voltage 110V/220V/380V/415V 50/60Hz are availbale;