MachineU > China Products > Machinery > Machine Tool Equipment > Hydraulic Ironworker
Hydraulic Punching And Shearing Combined Ironworker Punch Press Machine Bending HIW-60
Hydraulic Punching And Shearing Combined Ironworker Punch Press Machine Bending HIW-60
Specifications
Brand Name :
Hoston
Model Number :
HIW-90
MOQ :
1
Payment Terms :
L/C, T/T
Supply Ability :
100
Processing Capacity :
600KN
Material Tensile Strength :
450Mpa
Ram Stroke :
80mm
Throat Depth :
300mm
Dimension :
1650×800×1780mm
Description
Hydraulic Punching and Shearing Combined Ironworker Machine HIW-60

Industrial-grade hydraulic ironworker featuring multiple functions, including: round hole, square hole, oblong hole punching; steel plate, flat bar, angle steel, C-channel,

H-beam punching; steel plate bending; angle steel shearing, notching and bending; flat, round, square bar, C-channel, I-beam, T-bar shearing/cutting; angle bending and pipe notching.

Our machine is designed via the most advanced technology and has the virtues of easy operation, low consumption and low maintenance cost.

Model

 HIW-60/D HIW-90/S/D HIW-120/S/D HIW-160/S/D
Processing Capacity(KN) 600 900 1200 1600
Material Tensile Strength(Mpa) ≤450 ≤450 ≤450 ≤450
Ram Stroke(mm) 80 80 80 80
Number of Stroke(times/min)(mm) 8-22 8-22 8-22 8-22
Throat Depth(mm) 300 355 400 600
Shear Angle 7° 8° 8° 8°
Flat Shearing

Max. Shearing Capacity

(thickness*width)(mm)

 16×250 20×330 25×330 30×355
8×400 10×480 16×600 20×600
Profile Steel Shearing Square Bar(mm) 40 45 50 55
Round Bar(mm) 45 50 60 65
C-channel(mm) 126 160 200 280
I-beam(mm) 126 160 200 280
Angle Shearing 90° Shearing(mm) 120×10 140×12 160×14 180×16
90° Shearing(mm) 70×8 70×10 80×7 80×10
Hole Punching

Max. Punching Capaciy

(diameter*thickness)(mm)

 25×16 30×20 35×25 38×30
Motor 4 5.5 7.5 11
Dimension(mm) 1650×800×1780 1950×900×1930 2350×980×2100 2680×1060×2380

Standard Series:

Only one operator can work on this machine.

With one standard set of unit, including one pump, one motor and one valve.

Manual clamping

Without temperature cooling system

S series:

Only one opertaor can work on this machine.

With one standard set of unit, including one pump, one motor and one valve.

Manual clamping

Automatic clamping system in angle and plate shearing station

Temperature cooling system

D series:

Dual working ironworker(which means two operators can work on the machine at the same time)

With two sets of hydraulic units, including two pumps, two motors and two valves.

Automatic clamping system in angle and plate shearing station

Temperature colling system

Standard Functions:

Punching; Angle, C-channel Punching; H-beam Punching

Angle Shear; Round Bar Shear; Square Bar Shear; Flat-Bar Shear; Angle Miter Shear

Notching;

Optional Functions:

Pipe Notcing

Pipe Punching

Press Brake

Angle Bending

Radius Corners

Rounding off Corners

Bialateral Rounding off

Vee Nocthing

C-channel Jointing

I-Beam Shear

Channel Shear

Hydraulic Punching And Shearing Combined Ironworker Punch Press Machine Bending HIW-60
Hydraulic Punching And Shearing Combined Ironworker Punch Press Machine Bending HIW-60

Punching Station

  • A full range of punches and dies are available for various punchig needs.
  • Quick change retaining nut system for fast punch tooling change.
  • Thoughtfully designed stripper for visibility, safety andease of use.
  • A large 2-piece table with scales and gauging stops isstandard on all models.
  • Stripper with interchangeable plates of various openings to minimize deformation is standard on all models

Flat Bar Shearing Station

  • Specially machined upper blade to give a clean shear with minimum distortion.
  • Lower blade has four usable cutting edges.
  • Variable degree miter-cutting on angle flange.
  • Easily adiustable hold-down.
  • Support table with guides for accurate positioning.
 Hydraulic Punching And Shearing Combined Ironworker Punch Press Machine Bending HIW-60
Hydraulic Punching And Shearing Combined Ironworker Punch Press Machine Bending HIW-60

Angle Shearing Station

  • Single shear with no material loss and minimal deformation.
  • 45° miter-cut is easy and clean.
  • Stationary blades with four usable cutting edges.
  • Selectable corner radii on moving blades for optimumresults on small or large angles

Bar Shearing Station

  • One hold-down for various sizes of square bar shear-ing and round bar shearing.
  • Optional channel and section bar shear tooling is available for most models.(See specification chart fordetails)
 Hydraulic Punching And Shearing Combined Ironworker Punch Press Machine Bending HIW-60
Hydraulic Punching And Shearing Combined Ironworker Punch Press Machine Bending HIW-60

Notching Station

  • ldeal for notching of flat bars and angles.
  • Electrically interlocked safety quard for maximumsafety and visibility.
  • Gauging table included with stops for precise positioning.

Product tags

steel pipe straightening machine

,

iron pipe bending machine

,

hydraulic iron cutting machine
Send your message to this supplier
Send Now

Hydraulic Punching And Shearing Combined Ironworker Punch Press Machine Bending HIW-60

Ask Latest Price
Product Detail
Brand Name :
Hoston
Model Number :
HIW-90
MOQ :
1
Payment Terms :
L/C, T/T
Supply Ability :
100
Processing Capacity :
600KN
Contact Supplier
Hydraulic Punching And Shearing Combined Ironworker Punch Press Machine Bending HIW-60

Jiangsu Hoston Machine Tools Co., Ltd.

Verified Supplier
2 Years
jiangsu, taizhou
Since 2009
Business Type :
Manufacturer, Seller
Main Products :
Electric Hydraulic Servo CNC Press Brake, Synchronous Torque CNC Press Brake, Hydraulic Tandem Press Brake
Employee Number :
50~70
Certification Level :
Verified Supplier
Discover similar products
View More
Watch related videos

Find Similar Products By Category:

Supplier Homepage Products Ironworker
MachineU China Products Machinery Machine Tool Equipment Hydraulic Ironworker
Contact Supplier
Submit Requirement