120tph Asphalt Batching Mixing Plant /Asphalt Plant 1 Year Warranty
1. Simple equipment structure, flexible layout, easy maintenance. Modular design, easy to installation and move.
2. All conveyor belts are ring-bonded ,longer than belt buckle, no mechanical failure (belt buckle is easy to break).
3. SKF bearings (stirring, drying and other key core) - bearing long life, high temperature, low temperature and other extreme weather effects. Reduced maintenance.
4. Mixer wear parts using CrMo alloy, effective life more than 100,000 batches. Adopt double-axis dual-motor drive, high efficiency, low energy consumption. Asphalt with the second measurement of high pressure spray, stir quickly and evenly.
5. International first-line brand of electronic control components. PLC supporting remote detection (through the Internet can be remote on the system fault detection, recovery).
6. Big Dust removal area, and supporting a dust humidifier, to prevent powder warehouse flying.
7. All reducers are used hardened gear reducer ( long life, low failure, no oil leakage compared with cycloid reducer)
8. Machining parts are own processing, quality, delivery period are guaranteed, parts supply convenient and quickly in the future.
9. All equipment has test assembly and trial running before living the factory. To make sure each parts working reliable, connected correctly. Ensure the quality of the equipment which is stable and reliable.
10. Each component of the equipment comes from well-known suppliers. Stable quality, long working life. More importantly, the installation size to meet international standards, easy to replace.
Main advantages of 120t/h asphalt batch mix plant:
• Cost effective solutions for your project
• Multi-fuel burner for choose
• Environmental protection, energy saving, safe and easy to operate
• Low maintenance operation & Low energy consumption & Low emission
• Optional environmental design - sheeting and clad to customers requirements
• Rational layout, simple foundation, easy to be installed and maintenance
Technical parameters of 120tph batch asphalt mixing plant
Model | ZAP-S120 |
Rated capacity(T/H) | 120 |
Total power(kW) | ≈500 |
Mixer volume(kg) | 2000 |
Cold aggregtae kinds | 5 |
Vibration screen | Uniaxial circular vibrating screen |
Mixing cycle | 45S |
Fuel consumption | ≤6.5kg/t finished product |
Fuel type | Heavy/ Light oil |
Control mode | Manual/ Automatic |
Finished product temperature | 140-180°C |
Aggregate weighting precision | ±0.5%(Dynamic) |
Mineral weighting precision | ±0.5%(Dynamic) |
Bitumen weighting precision | ±0.25%(Dynamic) |
Dust control way | Primary cyclone dust collection , secondary bag dust collection |
Exhaust emission concetration | ≤20mg/Nm3 |
Finished product bin | Bottom placed / side placed |
Optional |
Asphalt Plant capacity is base on standard working condition as followings:
Atmospheric pressure | 760mmHg |
Ambient temperature | 20℃ |
Material passing 40mm mesh | 100% |
Material passing 3mm mesh | 40% |
Material passing 74µm | ≤7% |
Aggregate temperature at discharging end of drum dryer | 160℃ |
Density of aggregate | 1650kg/m3 |
Specific heat of aggregate | 0.21kcal/kg℃ |
Filler content | 5% |
Bitumen content | 5% |
Sand content | ≤40% |
Max.aggregate size | ≤40mm |
Average moisture of cold aggregates | ≤5% |
Cycle time per batch | 45s |
Diesel calorific value | ≥10500Kcal/kg |
Heavy oil calorific value | ≥9850Kcal/kg |
Nature gas calorific value | ≥8000Kcal/Nm3 |
Coal calorific value | ≥5500Kcal/kg |