120T/H Mobile batch asphalt mixing plant

Features of ZOOMLINE mobile asphalt mixing plant:

1. Modular design, super convenient fast move, installation
2. Screening, hot aggregate storage, weighing and etc. are all in a folding frame, implementation of the main building "a car haul"
3. Transport vehicles are less, base of installation without special treatment
4. Compact design, covering area is less
5. Accurate screening, weighing, forced mixing, finished product of high quality
6. International first-class control system, with functions of remote fault detection and maintenance
7. Each integration trailer are designed with "distributed" power distribution cabinet, all the connecting cable are connected before delivery, more convenient and safe.

Technical parameter of ZAP-M120 120t/h asphalt mixing plant

Main components of ZOOMLINE mobile asphalt mixing plant:

Cold Feed System---Mobile Type
Drying Drum---Mobile Type
Hot Elevator---Mobile Type
Mixing Tower---Mobile Type
Dust Collecting System---Mobile Type
Filler Supplying System---Mobile Type
Control Room (Mobile chassis is an optional)
Bitumen Heating and Supply System (Mobile chassis is optional)
Fuel oil Supplying System (Mobile chassis is optional)

Cold Aggregate Feeding System

The belt feeder adopts frequency conversion speed regulation, wide speed regulation range and high work efficiency.
Each discharge port has a material shortage alarm device, and if there is no material or arching, it will alarm automatically.
There is a vibrator on the sand bin to ensure normal operation.
A screen is placed on the top of the cold aggregate hopper to avoid large material input.
The conveyor belt adopts a jointless round belt, which runs smoothly and has a long service life.
There is a simple screen to avoid large material input in the input port of the feeding belt conveyor, ,which can improve thermal efficiency, and ensure the working reliability of the drying drum, hot aggregate elevator and vibrating screen.
Legs with support base to ensure adequate stability.

Drying System

Optimized the blade geometry of the dryer to make the drying and heating process extremely efficient, reduce energy consumption, and increase the heating efficiency by 30% compared with the conventional design; due to the high heating efficiency, the surface temperature of the drum is relatively low, so the cooling after operation the time is greatly shortened.
Completely insulated and composite aggregate drying drum. The support roller is driven by the friction of the polymer by the motor and the gear unit.
Adopt the famous brand Honeywell temperature intelligent control system.
Using Italian brand high combustion efficiency burners to ensure low exhaust emissions (such as carbon dioxide, low NO1 & NO2, sulfur dioxide).
Diesel, heavy oil, natural gas, coal or multi-fuel burners.
Using international standard parts, the maintenance cost is low.
Integrated highly efficient burner on one mobile chassis.

Mixing Tower

Integrated vibrating screen and thermal storage, weighing and blender in a mobile chassis for easy transport and installation.
Improve vibration and amplitude to optimize the impact on the available screen.The optimum combination of vibration direction and screen box inclination ensures screen ratio and screen efficiency.
Use the well-known brand TOLEDO weigh sensor to ensure accurate weighing and ensure the quality of asphalt mixture.
The mixer is a three-dimensional hybrid design with an array of long arms, short shaft diameters and bidirectional mixing blades.
The discharge process has been completely redesigned with minimal discharge time.
The distance between the blade and the bottom of the mixer is also limited to the optimum minimum.
Bitumen is sprayed from multi-points evenly over aggregate by one pressurized bitumen pump to achieve full coverage and high mixing efficiency.
Legs with support base to ensure adequate stability.

Dust Collecting System

Gravity type primary dust collector collects finer dust and saves consumption.
The discharge of the secondary dust collector in the baghouse is less than 20mg/Nm3, which is environmentally friendly.
Using the US Dopont NOMEX filter bags, it is resistant to high temperature and has a long service life. The filter bag can be replaced easily and without special tools.
Intelligent temperature control system, when the dust temperature is higher than the set value, the cold air valve turns on the cooling automatically to avoid the filter bag being damaged by high temperature.
Using high-pressure pulse cleaning technology, it is beneficial to reduce bag wear, prolong service life and improve dust removal performance.
Mobile chassis as optional according to project solution.

Control system

- Using Germany SIEMENS electrical components, it can work stably even under harsh working conditions.
- Using Japan's OMRON PLC and touch screen, which has strong data processing capability, automatic data sheet control, and can store various operational data in real time.
- All system power switches can be controlled through the control panel, which is easy to operate and easy to control.
- Multi-language compatibility, the display language can be selected according to customer preferences.
- The control cabinet is IP55 rated to meet the highest industry standards in the world.
- Container control room with thermal and acoustic insulation.
- Global remote automatic detection function.
- Mobile chassis as optional according to project solution.

asphalt mixing plant Delivery picture:

Company Description:

Henan ZOOMLINE Machinery CO., Ltd is based in Nanyang Longsheng Industrial Park of Henan, ZOOMLINE Machinery is a professional manufacturer of asphalt mixing plant,coal burner,oil burner,gas burner and support equipments that draws on years' experiences and technology developments.

Our service

1. Strong after-sales service team

We have a professional after-sales service team with advanced technology wich can provide you timely and reliable guarantee for all the after-sales service.

Transport----Basic site handle----Equipment installation-----Equipment debugging----Staff training---Technical support----Spare parts supply

Provide tracking service to your equipment.

2. Perfect accessories gallery

Machinery accessories gallery: kind of standard components, bears, reducer, motor, convey belt, axle and other machined part.

Electrical accessories gallery

3. Rapid response

We have kinds of communicate method, we can handle your problem the first and give you feedback within 24 hours no matter which method you choose.