4 Inch 480x480 Dots Square TFT LCD Display SPI RGB ST7701S/TFT-H040A1PVIST5N40
Product parameters
Display Size(mm) - 4 inch
Effective Dimensions mm - 71.86(H) x 70.18(V)
Angle - Full Angle
Connection method PIN number - 40PIN
Interface - 18 bit RGB+SPI
Working temperature - -20~70℃
Supply voltage - 2.8V
Driver chip model - ST7701S
General Feature
Item | Standard Value | Unit |
Display Size | 4.0 | Inch |
Number of Pixels | 480(H)* 3(RGB)* 480(V) | dots |
Active Area | 71.86(H)* 70.18(V) | mm |
Outline Dimension | 74.66(H) * 76.54(V) * 2.06(D) <TFT> | mm |
Viewing Direction | FULL O'clock | - |
TFT Interface | 18 bit RGB+SPI (Default 9b_SPI(fall) ) | - |
TFT Driver IC | ST7701S | - |
TFT Driver Condition | VCI=2.8V(Typ) | V |
Backlight-1 | White LED/8 PCS/4 LEDs serial 2 ways parallel | - |
Touch Panel | Without TP | - |
CTP Driver IC | FT6336U | - |
CTP Driver Condition | VDD=3.3V(Typ) | V |
Operation Temperature | -20 ~ 70 | ℃ |
Storage Temperature | -30 ~ 80 | ℃ |
TFT Pin Description
Pin NO. | Symbol | Description |
1 | LEDA | LED Anode |
2~3 | LEDK | LED Cathode |
4 | GND | Ground |
5 | VCI | Digital Power |
6 | RESX | - The external reset input |
7~8 | NC | Not Connect |
9 | SPI-SDA | Serial data input/output bidirectional pin for SPI |
10 | SPI-SCL | Serial clock input for SPI interface. |
11 | SPI-CS | A chip select signal GND: the chip is selected and accessible VCI: the chip is not selected and not accessible |
12 | DCLK | Pixel clock input pin |
13 | DEN | Data input enable. Display access is enabled when DE is “L”. |
14 | VSD | Vertical sync signal. |
15 | HSD | Horizontal sync signal. |
16~21 | DB0~5 | Blue data bus. |
22~27 | DG0~5 | Green data bus.. |
28~33 | DR0~5 | Red data bus. |
34 | GND | Ground |
35 | CTP-INT | CTP interrupt read signal.If not used, let this pin open. |
36 | CTP-SDA | CTP IIC data signal.If not used, let this pin open. |
37 | CTP-SCL | CTP IIC clock signal.If not used, let this pin open. |
38 | CTP-RTN | CTP Reset signal.If not used, let this pin open. |
39 | CTP-VDD | CTP Power supply.If not used, let this pin open. |
40 | CTP-GND | CTP Ground.If not used, let this pin open. |