Product parameters
Product Type - TFT Landscape
Dimensions (mm) - 235.00x143.00x 6.95
Field of View Window Size (mm) - 10.1 inch
Effective size mm - 222.72x125.28
Product Application - Industrial Display/Household Appliances/Medical Equipment
Perspective - Full Perspective
Backlight type or brightness - 1200cd/m2
Connection method PIN number - 40PIN
Supply Voltage - 3.3V
General Feature
Item | Standard Value | Unit |
Display Size | 10.1 | Inch |
Number of Pixels | 1024(H)*3(RGB)* 600(V) | dots |
Active Area | 222.72(H)* 125.28(V) | mm |
Outline Dimension | 235.00(H) * 143.00(V) * 6.95(D)) <TFT+CTP> | mm |
Viewing Direction | FULL O'clock | - |
TFT Interface | LVDS | - |
TFT Driver IC | EK79001+EK73215 | - |
TFT Driver Condition | VCI=3.3V(Typ) | V |
Backlight | White LED/42 PCS/6 LEDs serial 7 ways parallel | - |
Touch Panel | Without TP With RTP With CTP | - |
CTP Driver IC | GT9271 | - |
CTP Driver Condition | VDD=3.3V(Typ) | V |
Operation Temperature | -20 ~ 70 | ℃ |
Storage Temperature | -30 ~ 80 | ℃ |
TFT Pin Description
Pin NO. | Symbol | Description |
1 | VCOM | TFT Common Electrode Voltage |
2~3 | VCI | Digital Power |
4 | NC | No Connect |
5 | RESX | Global reset pin. Active low to enter reset state. Usually pulled high. For stability, an RC delay circuit needs to be connected externally. (RESX delay VCI greater than 1ms) |
6 |
STBYB | Standby mode, normally pull high. STBYB = "VCI", normal operation STBYB = “GND”, Standby mode |
7 | GND | Ground |
8 | D0N | LVDS negative differential data |
9 | D0P | LVDS positive differential data |
10 | GND | Ground |
11 | D1N | LVDS negative differential data |
12 | D1P | LVDS positive differential data |
13 | GND | Ground |
14 | D2N | LVDS negative differential data |
15 | D2P | LVDS positive differential data |
16 | GND | Ground |
17 | DCKN | LVDS negative differential clock |
18 | DCKP | LVDS positive differential clock |
19 | GND | Ground |
20 | D3N | LVDS negative differential data |
21 | D3P | LVDS positive differential data |
22 | GND | Ground |
23~24 | NC | No Connect |
25 | GND | Ground |
26~27 | NC | No Connect |
28 | HSD | Data channel selection STBYB = "VCI", 6 bit STBYB = “GND”, 8 bit |
29 | AVDD | Analog Power |
30 | GND | Ground |
31~32 | LEDK | LED Cathode,Not connected here |
33 |
L/R | Horizontal scan direction control pin L/R= "VCI", From left to right(Default) L/R= “GND”, From right to left |
34 |
U/D | Vertical scan direction control pin U/D= "VCI", From down to up. U/D= “GND”, From up to down.(Default) |
35 | VGL | TFT Gate OFF Voltage |
36~37 | NC | No Connect |
38 | VGH | TFT Gate ON Voltage |
39~40 | LEDA | LED Anode,Not connected here |
CTP Pin Description
Pin NO. | Symbol | Description |
1 | RSTN | An external low signal reset the chip. |
2 | VDD | Digital Power |
3 | GND | Ground |
4 | INT | Interrupt signal |
5 | SDA | IIC data signal |
6 | SCL | IIC clock signal |
DESCRIPTION
H101A9WSIFTKC40 is a high brightness 10.1 inch IPS TFT LCD display module with Projected Capacitive Touch Panel (CTP); made of resolution 1024x600 pixels. H101A9WSIFTKC40 model is built in with EK79001HN and EK73215BCGA driver ICs; it supports LVDS interface, contrast ratio 800:1 (typical value), brightness 1000 nits (typical value), aspect ratio 16:9, glare surface glass, normally black, transmissive LCD type. This 10.1" IPS TFT display has a wider viewing angle than TN TFT, it's view angle is Left:85 / Right:85 / Up:85 / Down:85 degree (typical value). This Capacitive Touch Panel is equipped with GT9271 IC on module, also available for I2C interface, multi-touch function, and compatible with Windows, Linux, Android and Mac Operating System.
The power supply voltage (VDD) of H101A9WSIFTKC40 is from 3.0V to 3.6V, typical value 3.3V. It can be operating at temperatures from -20℃ to +70℃ and storage temperatures from -30℃ to +80℃. If customers require Resistive Touch Panel, please consider H101A9WSIFTKC40 model.