Grade:AH5015

Product:Low Temperature Adhesive Cast Film For Aluminium Honeycomb Composite Panel

Decriptions

The polymer adhesive cast film for aluminum Honeycomb composite panels is based on the comprehensive research of aluminum honeycomb adhesive, combined with the independent intellectual property rights. It adopts the latest in-situ reinforecement,ionic cross-linking reinforcement, and toughening technologies,this adhesive has been successfully developed with many years of R&D and application experience.All the raw materials are virgin,which makes the film keeping high performance and stablity.

AH5015 adhesive cast film is used for aluminium honeycomb composite panel with 100% of adhesive resins,which ensures the honeycomb panel bonding well and has excellent peel strength.The processing temperature is low,for which makes the honeycomb panel combination well at lower temperature in high production speed.

Application

AH3015 polymer adhesive film is used for Aluminium honeycomb Panel,which can be used for outdoor headers,signboards,and interior and exterior decoration.The aluminium honeycomb panel is not easy to peel off and delaminate after using many years in interior or exterior area.

Advantages

Excellent bonding strength

Excellent resistance to Acid and Alkali and high UV resistance

Good anti-aging and long-lasting bonding performances

Low processing temperature in the production process.

Physical Properties

♦These are typical properties and not intended as specification

Specifications:

Width: 50mm-1600mm (Customization available)

Length: 600m/ roll or customization

Processing Suggestions :

Adhesive Layer Structure: AL+AH5015+aluminium honeycomb sheet +AH5015+AL

Bonding Temperature: 135℃-170℃ (Actual Temperature of tie Equipment)

Metal Surface: Phosphating or chromizing treatment and pre-degreasing treatment can avoid dust pollutants

QC Standard: IS09001:2015

Packing and Storage:

12 Rolls/Pallet,60- 80 KG/Roll (Customization available)；

Keep in a dry cool place. Avoid direct sunlight, ventilation, and moisture. The storage period at room temperature is 12 months. If the film color changes and elongation is found to decrease by 50%, do not use it.

.

Remarks: The above information and technical data are based on our existing product knowledge and experience. We do not guarantee the above content and do not assume legal responsibility. Customers must do a sample test before using our products to ensure the best processing conditions.