S50C Hot Rolled Carbon Steel Flat Bar To Make Middle-range Machine

Used for making injection plastic mould, mould frame and som middle-range machine.

► Equivalent grades:

► Introduction:

Grade S50C / 1.1210 / SAE1050 carbon steel is a high quality medium carbon steel, which adopted by the furnace, open-hearth, or oxygen converter steelmaking manufacture full killed steel having a uniform microstructure features.
The carbon composition of this kind of steels is over 0.4%, and it has good wear resistance, high tensile strength,easy for deformation and crack when quenching,so that quenching for this material is very importance and it must quick cooling after tempering in order to avoid temper brittleness.

It can improve the machinability of these carbon steel through spheroidizing.He steel is usually tempered to hardness 19~22HRC, to increase its cutting performance

► Available size (mm):

► Feature:

1) High-quality medium carbon steel,uniform characteristics of the microstructure.
2) Carbon content (mass fraction,%) ≥ 0.4, good wear resistance,ductility reduction.
3) Tempering must be quenched to avoid the occurrence of temper brittleness.

► Chemical Composition(%):

► Applications:

1) Can be used for a variety of cold mold die pad.
2) For the manufacture of high wear resistance, dynamic load and impact of the role of small machined parts and spring pieces.
3) Standard template material.

► Terms of payment:

30% deposit T/T and the balance by L/C at sight, or T/T

► Delivery condition:

For abundant stock, 15-20 days.For customized products, 30-50 days.

► About us:

Our company have introduced large-sized vertical saw machines, horizontal saw machines, milling machines, grinding machines and other advance equipments, we can export our products by wholesales and retail sales, whole plate or strip is available. All our products can meet the standards of DIN, AISI, JIS and GB, all the material should be inspected the ultrasonic, hardness and others strict inspection process before the shipment.
We can provide below service:
A. Steel plates: Cutting by bandsaw machine, milling, heat treatment, etc
B. Round bars: Cutting by bandsaw machine, peeling, grinding and turned, heat treatment, etc

► Our Main Products:

Plastic Mould Steel: S50C / 1.2311 / 1.2738 / NAk80 / 1.2083

Hot Work Mould Steel: 1.2344 / H13/ 1.2713 / 1.2581

Cold Work Mould Steel: 1.2379 / 1.2080 / 1.2510

Alloy Steel: 1.7035 / 1.7225 / EN31 / 1.6523

High Speed Steel: 1.3343 / 1.3355 / 1.3243 / 1.3247

► Product photos: