3 Years Battery Wireless Interconeted Smoke Alarms Detector Smok Alarm With ABS Material

Products Description

3 years battery operation: equipped with a sealed 3-year alkaline zinc battery, which can continue to supply power during the 3-year life of the alarm, without the need to replace the battery; and there is no need to worry about battery removal or unauthorized deactivation of the alarm

Accurately identify the response: The use of enhanced photoelectric sensors can quickly and accurately respond to all fire situations, with one alarm; provide smoke or fire warnings as early as possible, while minimizing false alarms

Interlinked devices function: Radio-interlinked smoke detectors are interlinked through radio frequency signals. If one smoke alarm detects fire, all alarms go off. In the case of the battery operated radio-interlinked smoke alarms, no wiring is required at all.

Self-activation: When it is installed in the mounting bracket, this alarm will be automatically activated; the TEST/SILENCE button allows you to temporarily silence the annoying alarm, unless the device is in alarm mode, otherwise the silent mode will not be activated

Auto-check function: continuous self-checking, reminding the alarm if there is a fault or the battery is low; the 85 dB alarm and LED indicator will remind you of the working status of the alarm

Easy to install: using the included mounting brackets, screws and anchors, it can be easily installed on any wall or ceiling; wireless connection installation

Quality Assurance: Pass TUV certification and meet CE safety standards; 2-year warranty and lifetime customer support

Technological Parameters

Feature

85db decibel alarm: The alarm noise level is set to 85 decibels at 3 meters to remind your whole family and help you prepare for an emergency.

3-year battery life: Built-in 3-year battery, so you don’t need to replace the battery frequently or worry about power failure.

Interlinked devices: Up to 30 device interconnections per group.Radio-interlinked smoke detectors are interlinked through radio frequency signals. If one smoke alarm detects fire, all alarms go off.

Silent mode: During the unit alarm period, you can press the test button, and the unit will pause the alarm for about 10 minutes. The red LED light flashes once every 8 seconds, indicating that the smoke alarm has entered silent mode.

LED indicator: red only, different states with different responses (The condition of the equipment can be judged according to different response states)

1. Normal status: Red LED Flashes once every 60 seconds.
2. Test status: Red LED flashes once every second.
3. Hush/Silence mode: Red LED flashes once every 8 seconds.
4. Low Battery status: Red LED flashes once every 60 seconds and 1 beep every 60 seconds.
5. Fault status: the alarm will deliver beeps every 40 seconds.

​

​

Where to install

1. At first you should install an alarm in the bedroom and walkway. If there are several bedrooms in the house, please install an alarm in every bedroom.
2. Install an alarm above the stairway and on every floor of the house.
3. Smoke, heat and burning things will spread horizontally after rising to the ceiling, so install the alarm in middle of the ceiling.
4. If the alarm can not be installed in the middle of the ceiling, in stall it keeping 300mm away from the corners . .
5. If the alarm is installed in the wall, it should keep 100mm away from the ceiling.
6. If the length of the room or the hall is beyond 30 foot, you need to install several alarms there.
7. When the wall or ceiling is slanting, the alarm needs to be installed minimum 500mm away from the highest wall or ceiling point in the room.

Packing List

1 × Photoelectric smoke alarm
1 × Mounting bracket
1 × Screw Kit
1 × User manual

FAQ

Q:How about the quality of Smoke Alarm?
A :We produce every product with good quality materials and fully test three times before shippment. What is more, our quality areapproved by CE RoHS SGS & FCC, IOS9001, BSCI.

Q: Can i have a sample order?
A: Yes, we welcome sample order to test and check quality. Mixed samples are acceptable.

Q: What is the lead time?
A: Sample needs 1 working days, mass production needs 5-15 working days depends on order quantity.

Q: Do you offer OEM service, like make our own package and logo printing?
A: Yes, we support OEM service, including customizing boxes, manual with your language and printing logo on the product etc.

Q: Can I put order with PayPal for a fast shipment?
A: Sure, we support both alibaba online orders and Paypal, T/T, Western Union offline orders. Please contact us for details.

Q: How do you ship the goods and how long does it take arrive?
A:We usually ship by DHL(3-5days), UPS(4-6days), Fedex(4-6days), TNT(4-6days), Air(7-10days), or by sea(25-30days)at your request.