1 watt output power 9mm in TO Package Single Emitter Diode Laser with PD
Based on Quantum-well epitaxy and ridge waveguide structure design, HTOE LDM series packaged single emitter diodes are Fabry-Perot cavity semiconductor lasers. LDM series packaged single emitters provide excellent reliability and performance. Standard options are 635nm, 650nm, 670nm, 785nm, 808nm, 830nm, 915nm, 940nm, 980nm and 1064 nm packaged on TO mounts, CoS mounts, C-mounts and F-mounts. Moreover, LDM series packaged single emitters provide beam shaping services like fast-axis compression according to customer demands.
Being one of HTOE standard laser diode, LDM-0980-001W-*3 TO packaged single emitter diode laser with 980nm center wavelength and 1 watt output power, can be compressed on fast-axis through a photodiode (PD) for beam shaping according to specific demands. If customers requir this beam shaping service, please make it clear.
Features
Parameters(20℃)
TOØ9 Packaged Single Emitter | |||||
Item | Parameter | Unit | LDM-0980-001W-*3 | ||
Min. | Typical | Max. | |||
Electrical Parameter | Output power | 1W | - | 1 | - |
Lasing Wavelength | nm | 970 | 980 | 990 | |
Spectral Width | nm | - | 1.0 | 2.0 | |
Emitting Area width | µm | - | 100 | - | |
Temperature Coefficient | nm/℃ | - | 0.30 | - | |
Fast Axis Divergence | deg | - | 34 | 38 | |
Slow Axis Divergence | deg | - | 7 | 10 | |
Optical Parameter | Slope Efficiency | W/A | 0.90 | - | - |
Threshold Current | A | - | 0.20 | 0.25 | |
Operating Current | A | - | 1.15 | 1.30 | |
Operating Voltage | V | - | 1.65 | 2.00 | |
Others | Package | - | TOØ9 | ||
Operating Temperature | ℃ | 10 ~ 50 | |||
Storage Temperature | ℃ | -10 ~ 60 |
Package Information
TOØ9 Package
Function Curve
P-I-V Curve Spectral Curve
Notice
ESD precautions must be taken when handling unit
ESD Cautions
The primary cause of diode failure is unexpected electrostatic discharge. To help prevent device failures, be sure to handle devices with extreme care. Users should always wear an ESD wrist strap, ground all applicable work surfaces and follow anti-static techniques when handling diode lasers.