It includes the mixing hopper, concrete doser with pneumatic control and storage silo and load cell
concrete dosing can be calculated kilograms or by time,with four Weight sensor,Dosing is accurate, the error ≤50g.

Pneumatic door switching design, not wasting any more concrete for each dosing. Mixing Hopper could save 1.5cbm wet concrete, has four storage silo under each doser, one time could save 30kg wet concrete. Diameter of dosser about 15cm, with frequency motor control the screw speed,Using the buffer cylinder, the switch reduces damage, reduces noise, and assists in feeding more accurately.

Digital screen controller, with all dosing weight available by only setting up the button , it is fully automatic mode. The action process is that the mold is in place and the material opening cover is opened to start feeding to the storage bin. After the material is supplied, the material opening cover is closed and the vibration is started, followed by the next cycle. A photoelectric switch needs to be installed. With self cleaning system,360-degree high-pressure rotating water gun,controlled by the PLC2.

Specification:

Applications

Wet cast machinery, is suitable for different silicone molds, rubber molds and plastic molds, size range from 200*200mm to 1500*1500mm, available for producing the artificial stone both for paving tile molds, 3D wall molds, wall panel molds, roadside stone molds, retaining wall molds, wall cap molds, etc.

Support and Services

Wet Cast Machinery technical support and services include:

• On-site technical support and maintenance
• Expert assistance with installation and setup
• Remote and telephone troubleshooting and support
• Periodic maintenance and inspection
• Repair and replacement parts
• Technical training and user manuals
• Upgrades and software updates