3500mm Used Tissue Paper Making Machine

1. Tissue Paper Making Machine introduction

3500mm toilet tissue paper machine can use waste paper (such as waste books, waste newspaper, used office paper, cutting waste from printing house) and virgin pulp as material to make high quality tissue paper. finished product can be small toilet roll, napkin tissue, facial tissue, kitchen towel. capacity is 5-6tons per day for 24 hours. it includes following sections:

1. pulp making line

2. paper making machine

3. paper converting machinery

4. boiler section

5. spare parts

2. Tissue Paper Making Machine Application

Mainly for the production of manufacture paper with pulp 18 - 30 g / ㎡, toilet paper. Paper napkin base paper

3. Tissue Paper Making Machine Crafts Parameters

1. Pulp: wood pulp plate, waste paper etc as raw material

• Feeding pulp concentration : 0.3-0.9‰
• Beating degrees : 30-38°SR
• Paper sheet dryness

come out from wire case : 18-20％

Before go through MG cylinder : 36-40％

Come out from MG cylinder : 90-94％

Finish tissue : 90-94％

• Lateral shrinkage : 8-10％
• Day running hours: 22 hours/d
• Papermaking rate : 94％
• Yield : 95％
• Touch roll line pressure: 60 KN/m

4. Tissue Paper Making Machine Supporting parameter

1. AC voltage : 380V；50Hz

• Control voltage : 220/24V
• Water pressure: 0.3Mpa;

Working pressure: 0.2Mpa

• Compressed air pressure: 0.8Mpa;

Working pressure: 0.5Mpa

• Steam pressure: 0.6Mpa;

Working pressure:0.3Mpa

• Vacuum suction tank: 20-40Kpa
• Water requirement: pure color, remove impurities, PH value 6.8

5. Tissue Paper Making Machine Parameters

1. Paper weight: 18-30g/m2

• Net width of paper :3900mm
• Designed speed : 230m/min
• Working speed: 150-200m/min
• Nominal capacity : 10T/D
• Track gauge : 4600mm
• Wrinkling rate : 15-30℅
• Drive way: Y-type AC motor drive division, section drive
• Control way:frequency conversion
• Power:

MG cylinder motor: 95kw

Roll-cylinder motor: 7.5kw

Total:102.5Kw