Battery Manufacturing Machinery Endless Belt With Acid Resistance

Product Profile

This is a kind of seamless conveyor belt specially applied to the Battery Manufacturing Machinery. In the production process of the battery, pasting plates is a very important part of the process. That will be needed a conveyor belt to carry the plates to the position of the paste, that conveyor belt is called Battery Pasting Belt. This kind of belt’s service cycle is about 7-15 days, it could pass the plate at most 10 lacs, of course, the service cycle is also related to the customers’ using habits.

Product specification:

Product name: Battery Pasting Belt

Raw material: Synthetic Fiber

Production Process: Needle-punched

Appearance: No scratches/depressions/bulges on the surface, no lint; Neat trimming, no flash; Uniform thickness;

Glue layer: 2.5-3MM

Tolerance: Length: ±5MM Thickness: ±0.2MM

Thickness: 3-10MM

Length: 1770-4000MM or as your demands

Width: 200-800MM or as your demands

Product Details

Our pasting belt is the truely endless type, made of synthetic and cotton raw material, Smoother surface.

Specification:

If there have no size you request, kindly let me know your demands, we accept customization.

Advantage:

1.Made of cotton and synthetic fibers
2. Longer duration of the belt
3. Higher abrasion resistance of the surface.
4. The equal surface on the top and bottom of the belt as each belt is ground to the measure, Equal thickness.
5. Endless, without joint – all the surface of the belt is the same.

Some of the application show FYI:

The pasting belt is specially designed for lead-acid battery production line - pasting machine. Our pasting belt is widely used for most of the pasting machine in the world, let me know your pasting machine model, our technical person will supply you the best solutions.

Packing & Delivery:

Package: plastic bag + Bubble wrap + woven bag

Delivery: by courier or by air or by sea or as your demands

Daily maintenance and instructions

6. It should be used within four months after received

7. It should be stored in a low-temperature dry environment, to avoid direct sunlight

8. It should be check if there have any sundries on both sides of the belt, in order to avoid scratching the belts

9. It should be as wet as possible when using the belt

10. It should be washed with a clean surface after a half-working day

Note: on the basis of the working life, good maintenance can increase the working life