8000g/m2 Off White Color Endless Nomex Calendering Felts/Blanket For Compacting Machines

DESCRIPTION

The blanket belt adopts the imported high-temperature-resistant aramid fabric, and the medium substrate can be divided into two kinds, namely polyester dry net and Kevlar substrate.

2. The use temperature can reach less than 250℃. At the end of usage, the convergence

shrinkage is 2% and the extending rate is 3%.

3. It is the transferring printing blanket belt special for all kinds of textile fabrics, curtain cloth, and decoration cloth.

4. This blanket also named Thermal Transfer Printing Felt, Heat Resistance Roller Sleeve, High-Temperature Seamless Blankets. This blanket is the most important component of heat transfer printing machines.

5. The specifications of all the products above can be customized according to the needs of the clients.

SPECIFICATION

Product Advantage

1. Misaligned----Our base cloth is used endless industrial silk. The testing report showed the misaligned rate is about ±3mm. enclosed our base cloth for your consideration

2. Shrinkage----The base cloth can control the shrinkage rate by 2.5%--3%.

3. Material---100% DUPONT Nomex.

APPLICATION

Calendering Felts For Compacting Machines are used on the following machines : Ferraro, Monti Muzzi, Sautex, Sperotto, Poongkwang, Monfortl, Lafer etc.

Package&Delivery

Package: plastic bag+carton

Delivery: Express company & by air & by sea or as your demands

Some of the commonly used size for your reference:

The perimeter(MM) ------------------------ Width(MM) ------------------------ Thickness(MM)

1320 ---------------------------------- 1215 ---------------------------------- 8

3140 ---------------------------------- 1960 ---------------------------------- 8

2240 ---------------------------------- 1700 ---------------------------------- 8

If you have other demands about the size, kindly let me know, we accept the customization.

The direction of our felt belt

1. The blanket must be install as the direction of the arrow, fixing both sides of the perimeter

to see if the perimeter is the same.

2. Adjust the machine pressure within 2kg. heat up to 150 ℃, idle for 2 hours; heat up to

170℃, idle for 2 hours; heat up to 190℃, idle 3 hours( important); heat up to 200℃,

idle for 2 hours.

3. Then the belt will suitable for your machine, you can adjust the machine pressure in 3--5kg

according to your needed and start printing.

FAQ

1. How long it can be use?

Depend on your scale of production and your use custom.

2. The Sample is free?

Yes, if you need the samples, we will send it to you freely. but hope you pay the freight. thank you.

3.What is the lead time?

About 7 working days.

4.What is the packing?

By air & by sea or as your demands