The TEM28 board supports electrical cross-connections, L2 layer switching and the QinQ function.
Table 1 and Table 2 list the functions and features of the TEM28 board.
Function and Feature | Description | |||
---|---|---|---|---|
Basic function |
| |||
Client-side service type | FE: Ethernet service at a rate of 125 Mbit/s. Supports FE optical signals and FE electrical signals. GE: Ethernet service at a rate of 1.25 Gbit/s. Supports GE optical signals and GE electrical signals. 10GE LAN: Ethernet service at a rate of 10.31 Gbit/s NOTE: The TEM28 board transmits FE or GE electrical signals, GE optical signals, or 10GE optical signals on the client side. When the TEM28 board transmits GE or FE electrical signals, to facilitate fiber routing, you are advised to install electrical modules at the RX27/TX27 and RX28/TX28 ports. | |||
Cross-connect capabilities | Supports the cross-connection of a maximum of 16 channels of ODU0 signals, or 8 channels of ODUflex signals, or 8 channels of ODU1 signals, or 2 channels of ODU2 signals between the TEM28 board and a cross-connect board by using the backplane. | |||
OTN function |
| |||
LPT function | Supported NOTE: The LPT function cannot be configured for EVPL services but only for bidirectional EPL services (port <-> VCTRUNK). When the LPT function is enabled, Source C-VLAN andSink C-VLAN of an EPL service must be left empty. FE/GE electrical ports of the TEM28 board do not support the LPT function. | |||
FEC encoding | Not supported. | |||
Alarms and performance events monitoring |
| |||
ALS function | Supports the ALS function on the client side. NOTE: ALS function is supported only when EPL services (port <-> VCTRUNK) are provisioned. | |||
PRBS | Not supported | |||
Physical clock | Supports synchronous Ethernet. NOTE: FE/GE electrical ports of the TEM28 board do not support the physical clock function. The board does not support the physical clock when it is provisioned with 10G WAN services. | |||
Test frame | Supported | |||
Latency measurement | Not supported | |||
Electrical-layer ASON | Supported | |||
Protection scheme |
NOTE: Client 1+1 protection is supported only when EPL services (port <-> VCTRUNK) are configured on the board. | |||
Loopback | 10GE optical interface | MAC | Inloop | Supported |
Outloop | Supported | |||
PHY | Inloop | Supported | ||
Outloop | Supported | |||
GE optical interface | MAC | Inloop | Supported | |
Outloop | Not supported | |||
PHY | Inloop | Supported | ||
Outloop | Not supported | |||
GE electrical port | MAC | Inloop | Supported | |
Outloop | Not supported | |||
PHY | Inloop | Supported | ||
Outloop | Supported | |||
FE electrical port | MAC | Inloop | Supported | |
Outloop | Not supported | |||
PHY | Inloop | Supported | ||
Outloop | Supported | |||
Protocols or standards compliance | Protocols or standards for transparent transmission (non-performance monitoring) | IEEE 802.3 IEEE 802.3z | ||
Protocols or standards for service processing (performance monitoring) | ITU-T G.703 ITU-T G.652 ITU-T G.808.1 ITU-T G.873.1 G.709 ITU-T ITU-T G.655(1996) ITU-T G.671 ITU-T G.7041 IEEE 802.3 IEEE 802.3z ITU-T G.709 ITU-T G.692 |
Function and Feature | Description | ||||
---|---|---|---|---|---|
Interface characteristics | Port working mode | 10GE optical port: 10G FULL LAN, 10G FULL WAN(SONET) GE optical port: 1000M FUL, auto-negotiation GE electrical port: auto-negotiation FE electrical port: auto-negotiation | |||
MFL | 1518 bytes to 9600 bytes | ||||
Multicast | VLAN multicast | Supported | |||
IGMP snooping V2 | Supported | ||||
Layer 2 switching |
| ||||
Ethernet service | EPL EVPL(VLAN) EVPL(QinQ) EPLAN(IEEE 802.1D) EVPLAN(IEEE 802.1Q) EVPLAN(IEEE 802.1ad) NOTE: "EVPL (VLAN)" is displayed as "EPL" on the NMS. | ||||
Protection schemes | ERPS | Supported | |||
LAG |
| ||||
DLAG | Supported | ||||
MC-LAG | Supported | ||||
Maintenance features | ETH-OAM | Supports ETH OAM protocols defined by IEEE 802.3ah and IEEE 802.1ag. | |||
RMON | Supported | ||||
QoS |
| ||||
Flow control | Supports IEEE802.3X-compliant Ethernet flow control protocol and flow control termination. | ||||
Protocols or standards compliance | Protocols or standards for transparent transmission (non-performance monitoring) | IEEE 802.1q VLAN All Layer 2 protocols such as xSTP, LACP, EthOAM, DHCP, and PPP etc. MPLS protocols All L3 protocols including ARP, IGMP, OSPF, IGRP etc. | |||
Protocols or standards for service processing (performance monitoring) | ITU-T Recommendation G.8032/Y.1344 IEEE 802.3x pause frame IEEE 802.3ad LACP IEEE 802.1p priority IEEE 802.1q VLAN IEEE 802.1ag OAM IEEE 802.3ah OAM RFC 4541 IGMP Snooping IEEE 802.1ad IEEE 802.1d IEEE 802.1s IEEE 802.1w IEEE 802.3z IEEE 802.3u IEEE 802.3ab IEEE 802.3ae ITU-T G.8261/Y.1361 ITU-T G.8262 |
Specifications include optical specifications, dimensions, weight, and power consumption.
Board | Client-Side Fixed Optical Module | Client-Side Pluggable Optical Module |
---|---|---|
TN54TEM28 | N/A | 1000 BASE-SX-0.5 km-eSFP (I-850-LC) 1000 BASE-LX-10 km-eSFP (I-1310-LC) 10G BASE-SR-0.3 km-SFP+ 10G BASE-LR-10 km-SFP+ 10G BASE-ZR-80 km-SFP+ |
Board | Typical Power Consumption (W) | Maximum Power Consumptiona (W) |
---|---|---|
TN54TEM28 | 105 | 113 |
a: The maximum power consumption is the power consumed by the board when it works normally under the highest ambient temperature. |
Cargo will be delivered within 1 day after payment arrived. Tracking Number will be offered once delivery done.
Delivery Options | Estimated Delivery Time |
---|---|
![]() ![]() ![]() | 3-5 business days |
![]() | 3-5 business days |
![]() | 10-20 business days |
Notice:
Above mentioned information are just for your reference only,we will keep you posted for the tracking delivery schedule.There are two delivery options available for by air and by sea:
Deliver to port:
Uonel is responsible for transporting goods to port. All subsequent customs and transportation fees are the
responsibility of the buyer. Uonel will recommend trustworthy local freight forwarders to you.Uonel can facilitate the progress under buyer's permission and at buyer's expense.
Deliver to door:
Uonel will quote all destination charge prior once we have confirmed order.
Uonel is responsible for transporting goods to door after you have made the payment.
100% Low Price Guarantee:
Uonel provides high-quality products at low wholesale prices
100% Quality Assurance:
All items are ORIGINAL NEW and GENUINE only.
Free Technical Support:
Our FREE Huawei Expert Consultancy Support is over the phone, by chat, by email or by login remotely.
100% Money Back Guarantee:
You can contact our customer service team to exchange or return any product that you bought from us.
Flexible Secure Payment & Shipment:
Verified authorization: Mcafee Secure, VeriSign Secured
Return Material Authorization (RMA) Process
Standard Hardware Warranty Policy:
Original new sealed Huawei product: 1 Year
The Support Contacts:
If your Huawei products failed, you must contact your sales representative to verify product failure. If the problem still can't correct by remote support methods i.e. email or phone support, the RMA procedure will issue.
Uonel is one of the biggest Huawei Network Hardware distributor in china, founded in 2008. We are a global provider of netwotking products with more than 5000 customers.
We provide original new Huawei Routers,Switches,Firewalls,Wireless APs & controllers,OLTs,GPON modems,optical transceivers.Our company have more than $5million Huawei products in stock.
Most of our technical engineers had work exprience in Huawei company,we can provide network design&planning,configration,troubleshooting,maintenance and training service in world wide.