Cold Feeding Extruder

• V belt rubber cover
• Butadiene rubber o ring
• Inner tube extruder
• Foaming boards with high toughness
• Foaming tubes with high toughness
• NBR,PVC bubble tube
• NBR,PVC rubber foam sheet
• Rubber and Plastic Foaming Tube and Plate
• Smooth, high toughness yoga mat
• Smooth, high toughness insulation board
• Smooth, high toughness insulation tube
• Inner tube

Pneumatic V belt rubber cover extruding head
Special extrusion of butadiene rubber o ring

Spiral structure with large length
Specializing in the production of smooth high toughness foam board foam tube
To facilitate NBR and PVC miscibility
Accurate display of pressure and temperature
In favor of vulcanizing agent foaming agent dispersed evenly
Air permeability thermal conductivity vacuum water absorption and other physical indicators are better
High and stable extrusion pressure

90X16D cold-barrel feeding extruder, large length secondary screw structure, specializes in the production of smooth high toughness foaming sheet and tube. Large length secondary screw structure is beneficial to the blending and dissolution of NBR and PVC, which makes the foaming speed and vulcanization speed match well. Accurate display of pressure and temperature provide support for formula adjusting, speed setting and other process parameters. Thank you for your trust! Wish the company prosperity.

120X16D cold feeding extruder with large aspect ratio, long pair screw,makes it specializes in rubber plastic foaming board and foaming tube smooth surface products.
The special spiral design is beneficial to NBR,PVC blending and dissolution as well asblending and dissolution of vulcanization agent and foaming agent.

Inorder to make sure rubber, plastic two polymer materials could blend and dissolve fully.150X16D cold feeding extruder must use 16:1 long diameter ratio screw, and must have long enough secondary screw structure to produce smooth, hard, tough rubber and plastic foam tube, board, including yoga mat. After extrusion, the product will be with high strength, good elasticity and low solubility, and the physical indexes such as permeability coefficient, thermal conductivity and vacuum water absorption are more excellent.

150X16D cold feeding extruder, specializing in extrusion of smooth surface, high toughness yoga mat, board and insulation tube, etc., The screw adopts the structure design of longer secondary screw, which benefits the mutual mixing of NBR and PVC, and also the formation of high and stable extrusion pressure. Thank you for your trust and support. Wish you a prosperous business!