OEM Terminal Stamping Metal Stamping Parts Factory

Basic Terminal Stamping Process Description:

The main basic processes of stamping are blanking, punching, bending and deep drawing. Among them, are blanking and punching Blanking and punching processes for separating blanks. The process of blanking and punching is exactly the same, but the purpose is different. When cutting, the separated part is the finished product, and the rest of the periphery is the waste product; the punching is to obtain the hole, the punched plate is the finished product, and the separated part is the waste product. Blanking and punching are collectively referred to as blanking. The punch and the concave die of the blanking die have sharp edges, and there is a gap of 5%-10% of the plate thickness between the punch and the concave die to ensure that the incision is neat and the burr is less.

Terminal stamping Parameter:

Terminal Stamping Factory Introduction:

Huishuo Ltd., established in August 2009, is an OEM/ODM Chinese manufacturer specializing in the design and manufacture of progressive metal stamping dies, deep draw dies, plastic injection dies, precision sheet metal stamping and plastic injection products. Stamping products include precision terminals, connectors, electronic shielding cases, metal housing, precision shrapnel, battery contact chips, metal brackets, electronic radiator/heat sinks, and so on, ranging from small to complex size, metal and plastic components. Our products are widely used in hundreds of applications: precision connector terminals, relay shrapnel, micro motor shrapnel, IC lead frames, automotive terminals, home appliance precision shrapnel, intelligent electronic components, and medical terminals and other consumer electronic parts industries.