SECOZOOM SFP 2-24x50 Riflescope Mil Dot High Light Transmission Long Range Tactical Scope

Detailed description

2-24x50mm SECOZOOM long range riflescope features associated with top-tier riflescopes.

Matching reticle and turret measurements allow accurate, fast dialing of shots. The one-piece 35mm tube, precision-machined from a single solid block of aircraft-grade 6061-T6 aluminum, offers ample windage and elevation adjustment. Born from an intimate understanding of riflescope design, forward-thinking engineering, and open ears to a market incredibly vocal about what it wants in a riflescope, it delivers the performance and features tactical shooters demand at an economical price.

USA Army Sniper standard Mil-Dot on both 2-24x50mm first front focal plane models and 2-24x50mm rear focal plane models.

What makes our 2-24x50 SFP rifle scope stand out from the crowd?

No.1 OPTICAL FEATURES

Second Focal Plane Subtensions remain consistent throughout the magnification range.

Optically Indexed Lenses Delivers optimum image sharpness and brightness with true reticle use for full ranging and holdover from edge to edge because of computer-controlled alignment during construction.

Proprietary Fully Multi-Coated anti-reflection lens coatings increase light transmission with multiple coatings on all air-to-glass surfaces. An unmatched 96.9999.....% Light Tramsmission.

No.2 CONSTRUCTION FEATURES

35 mm Tube Provides greater strength and wider adjustment lattitude as compared to a 30mm or 1-inch tube.

One-Piece Tube Maximizes alignment for improved accuracy and optimum visual performance as well as strength and waterproofness.

Aircraft-Grade Aluminum Construction form a solid block of 6061-T6 aircraft-grade aluminum delivers increased strength and rigidity.

Waterproof O-ring seals prevent moisture, dust, and debris from getting inside the tube for reliable performance in all environments.

Fogproof Filled with argon gas to inhibit internal fogging over a wide range of temperatures.

Shockproof Lenses are locked in place, fore and aft, with machined locking rings to remain in perfect alignment and resist impact.

​No.3 INTERNAL MECHANISM DESIGN FEATURES

Tall Uncapped Turrets Make range calculation and shooting adjustments fast and accurate with subtension marks that match the reticle .

Constant subtensions allow accurate holdover and ranging at all magnifications—no shift in point of impact during zoom.

Single Spring Construction Fully constrains (without over-constraining) the optical system for predictable, improved accuracy throughout the range of elevation adjustment.

Glass-etched Reticle Protected between two layers of glass (not made from wire) for optimum durability and reliability.

Illuminated Reticle Electronic illumination aids in low light visibility of reticle. Battery included.

Illumination Control Can be turned on or off with a single click between each intensity level—allowing access to a preferred illumination setting without having to progress through each intensity level.Positioned at 45 degrees off the left side of the eyepiece for easy adjustment without blocking view of the turret setting or magnification.

Hard Anodized Finish Type-3 hard-coat anodization is durable; the low-glare matte helps camouflage the shooter’s position.

Ultra-hard, scratch-resistant coating repels oils and corrosive salts on outer glass surfaces.

No.4 Item Parameters

No.5 CONVENIENCE FEATURES

1. Patent pending turret lockingsystem, 7.5 or 15MOA perrevolution, scopes can be locked down in applications that do not require ranging. Stainless Steel &brass construction,rust proof,triple sealed.

2. 1/4 MOA increments.

3. Fast Focus Eyepiece Allows quick and easy reticle focusing.

4. Side Parallax Uses an adjustment mechanism on the left side of the riflescope to fine-tune focus to eliminate parallax shooting error.

No.6 ZEROING YOUR SCOPE

Your scope comes with between 42 and 140 Minutes of Angle of adjustment. One

MOA is appx.1 inch at(1.047) 100 yards, 2 inches at 200 yards, 3 inches at

300yards and so on.At one hundred yards, moving the windage knob 1 click will

move the bullet point of impact left or right 1/8 inch on CSO scopes with 1/8 MOA

adjustment turrets and 1/4 inch on 1/4 MOATurrets. Same for the elevation turret.

(The top one, this moves the bullet impact up or down). Scopes with side focus

adjustment knobs allow you to set the scopes focus for the proper viewing dis-

tance. If you have no side focus knob, it means your scope is one of our parallax free designs. You

scope will arrive to you approximately zeroed in the middle of the range of

windage and elevation.

WARNING! If your scope has lockable turrets (You will see a second smaller knob

on the top of the turrets) make sure you loosen this before adjusting windage or

elevation. If you don't you will strip the internal indexing grooves or shear off the

tip of the indexing pin, both fixable, but considered operator abuse.As a practical

matter you would need an awful lot of force to do that-if the knobs won't turn, be

sure to unlock them first!

After mounting, fire three shots.

No.7 MAINTENANCE & CLEANING

SECOZOOM long range Scopes are some of the most durable optical devices in the planet. If you

are in the field, there is no need to remove surface dirt, other than keeping the

lenses clean. Leave it dirty, it helps with camouflage. If severely dirty, you may

hose it off. Do not use power washers as you can force dirt into the many hi-temp

pressure seals that keep the inert anti-fog rare earth gasses inside the tube. If

greasy, use any mild soap and water mix, do not use harsh gun cleaning solvents

that can seep into seals. You may paint the scope as needed, but don't paint to

heavy or to quickly and don't let the paint seep into the edges of the turrets or

around the zoom ring. To much paint and you will make those rotating parts

harder to turn.Also mask off the screw threads on the front of the scope in case

you later wish to affix sunshades or Anti-Reflection devices.