SS100 Model Building Material Hoist Load 1000kg One Cage Factory

Short Parameters:

1. SS100 Single Cage Building Hoist

2. Rated laod: 1000kg

3. Height: 24-60m

4. Speed: 22m/min

5. Mast section: 0.8*0.8*1.508m

Specification

Introduction
1. SS100 Material Elevator is widely used in the vertical transport of high-rise and multi-storey construction, mining, workshop materials.
2. The utility model has the advantages of simple structure, quick and easy installation and disassemble, safe and reliable use, economic benefits and high work efficiency.
3. The machine has a single cage and double cage in two forms, users can choose their own needs.

4. The body adopts the mast section structure which is interchangeable, and is connected by high-strength bolts.

Safety device
1. Overweight protection
2. Phase sequence protection
3. Safety door protection
4. Interlayer protection
5. Motor reverse protection
6. Mechanical anti-roll top protection
7. Sensor failure protection
8. Motor short circuit or overload protection
9. Bell output function
10.Data protection

Introduction of SAS Safety Device:
1. SAS series of anti-fall safety device is installed on the both sides of the cage cross-beam of material wire rope construction hoist, along the rail movements of the automatic anti-fall safety device,. When the cage loss of weight falling due to sudden breaking of wire rope.
2. Anti-dropping device can automatically buckle both sides of the guide rail to prevent the cage falling, so as to achieve the purpose of safety.
3. When the wire rope and other repairs cage again after the rise, the anti-dropping device eccentric wheel will automatically unlock the cage, cage resume normal operation.