Industrial machinery underground truck hydraulic pumps cost-effective

Quick Detail:

· Cast iron housing

· Hydraulic components

· Model PV22+MV23

· Hydraulic system power components

· Principle hydraulic transmission

· Features lifetime technical support

· Simple layout

· System Solutions

· Work fast

· Fully replace imported products

· Patent certificate certification

· Application industrial machinery underground truck hydraulic pumps

· 1 year warranty

Description:

How to use the scraper?

(1) When the scraper starts, generally lift the bucket door first, then lift the bucket, and try to avoid lifting the bucket when the bucket door is completely closed, which is beneficial to protect the bucket door mechanism and hydraulic pipeline. The soil device is retracted to the back of the bucket, the bucket door is opened, and the bucket is lowered so that it is close to the ground.

(2) When shoveling soil, the bucket should be cut into the soil slowly, and the height of the bucket door from the ground should be controlled at about 300mm. When digging hard ground and loading clay, the bucket should be moved up and down. If the soil condition is bad, use a bulldozer to help At this time, special attention should be paid not to damage the rear wheel tires of the scraper with the bulldozing plate of the booster machine. When shoveling and hauling soil, try to arrange shoveling and hauling soil on the downhill, so that the mechanical separation can be used. In order to reduce the power consumption of the tractor and improve the productivity. When the scraper is working on the slope, it is necessary to pay attention to the depth of the blade, and do not overload the operation. Do not shovel soil when turning, because the gantry is prone to generate when the lateral force is applied. deformation and damage.

(3) No matter what kind of operation is performed, the power of the tractor should be fully utilized. For this reason, the scraper operator must clarify the working conditions (soil quality, terrain, transportation distance, etc.) of the working place, and select different speeds according to the working conditions to prevent the tractor Overload. Under normal circumstances, the first or second gear speed is used to shovel and load soil, and the blade can be cut to the deepest; when transporting and unloading soil, according to the slope of the operating area, the tractor can work at the second or third gear speed. ;If you return with empty car, you can use the speed above the fourth gear, but it is not allowed to drop the bucket at high speed, otherwise the impact force is too large and the trunk of the elephant will be broken.

PV22+MV23 Technical parameter:

Notices:

Hydraulic oil
The suitable replacement period for hydraulic oil in a sealed tank system is 2000 hours, and more often if the hydraulic oil is contaminated with water or other external materials or subjected to abnormal operating conditions.
As a general recommendation, the 10µ inlet oil filter should be replaced every spring or every 1500 hours (whichever occurs first) on a sealed tank system, or in an open tank system with an air filter fill cap. The oil filter should be replaced every 500 hours.
Heat Exchanger
The heat exchanger core and fins are kept clean at all times for maximum cooling and system efficiency, and the exterior of the heat exchanger is checked daily for blockages and cleaned as needed.
Application:
Mixer truck: concrete mixer truck, cement mixer truck;
Coal mining machinery: scraper;
Industry: pharmaceutical machinery;
Transport vehicles: road rollers, concrete pump trucks, stabilized soil mixers

FAQ:

Q1. Can I have a sample order for Industrial machinery underground truck hydraulic pumps ?

A: Yes, we welcome sample order to test and check quality.

Q2. What about the lead time?

10 to 15 days for samples, mass production according to MOQ

Q3. Do you have any MOQ limit for Industrial machinery underground truck hydraulic pumps ?

A: Low MOQ, 1pc for sample checking is available.

Q4. How do you ship the goods and how long does it take to arrive?

Ship by sea, it generally takes 15-20 days to arrive, and air is also optional.

Q5. How to proceed an order for Industrial machinery underground truck hydraulic pumps ?

A: Firstly let us know your requirements or application.

Secondly We quote according to your requirements or our suggestions.

Thirdly customer confirms the samples and places deposit for formal order.

Fourthly We arrange the production.

Q6: Do you offer guarantee for the products?

A: Yes, we offer 1 years warranty to our products.

Q7: How to deal with the faulty?

Firstly, our products are produced in strict quality control system.Secondly, we will inspect the defective pump and motor, and then respond according to the actual situation.