vertical 1500kw Kaplan hydraulic turbine generator for micro power plant

overview

Kaplan turbine is widely used in a hydro power stations with the head of 2-30 meters. It is equipped with a vertical axle. There are three different types of this kind in which there is anopen trough or apressure trough or closed concrete worm-shell trough. The turbine is made up of several propellers or manualy-ajusted blades. The water pipe at the end is vertical cone-shaped or elbow-shaped. The turbine with a diameter of 1000mm is vertical cone-shaped. Therefore, it is fit for a small hydro power station with low head and load

Product Features

1. Suitable for the development of low water head larger flow of water resources;

2. Appliceable to large and small head change load changes of power plant;

3. For the low head,head and power changed greatly power station,can stably under various working conditions;

4. This machine is a vertical shaft device,has the advantages of simple structure,convenient repair,equipment,low price,easy to realize the direct drive etc.

5. The Kaplan blade is generally operated by the oil pressure relay installed in the body of the runner, which can rotate according to the change of head and load, so as to maintain the optimal coordination between the Angle of the guide vane and the Angle of the blade, thus improving the average efficiency. Kaplan turbine The highest efficiency of this kind of turbine has exceeded 94%. However, this kind of kaplan turbine needs a mechanism to operate the rotation of the blade, so the structure is more complex and the cost is higher.

Specification

Why choose us?

1. More than 20 years of industry experience, install commissioning more than 150 equipment each year

2. Provide complete proposal for hydro power plant from water to wire

3. Abundant foreign power plant project implementation experience such as France, Japan, USA, South Africa, Sri Lanka, Iran, Southeast Asia

4. Design and manufacture of hydro power generator with voltage 400V,6.3KV . capacity exceed 1000kw with 400V

FAQ

1. You are a trading company or a manufacture?

We are a hydro turbine generator manufacture with over 20 years of experiences, Our factory is in the Sichuan you will take 2 hours driving after you reach Shuangliu Airport, pay a visit to our factory you will know more about us.

2. What Kind of water turbine should I choose?

We need to know water head, flow rate, voltage level, frequency, on-grid or off-grid running, automation level from you to work out the solution

3: Can you do the EPC for the hydro power plant?

Yes, We can design, producing and install the equipment, we will dispatch technologist and workers to install the equipment.