MachineU > China Products > Tools & Hardware > Hydraulic Tools > Hydraulics Pumps

OEM / ODM Cartridge Solenoid Valve Hydraulic System KSV10-47B-0-N

Specifications

Brand Name :

Kaienli

Model Number :

KSV10-47B-0-N

Certification :

Available

Place of Origin :

China

MOQ :

1 pieces

Price :

USD 5- 40 per piece (depends on the different types )

Payment Terms :

L/C, D/A, D/P, T/T, Western Union, MoneyGram

Supply Ability :

usually about 2 weeks, depends on which type and the quantity demand

Delivery Time :

2 or 3 weeks, depends on quantity and design

Packaging Details :

Plastic film+PE bag+mesh packaging sleeve+sponge spacer+cardboard box+pallet

Product Name :

KSV10-47B-0-N Support OEM ODM hydraulic system design Chinese manufacture for hydraulic solenoid valve

Cavity hole :

VC10-4 hole

Pressure :

350 bar (5075 psi)

Flow rate :

22.7 lpm (6 gpm) maximum at 207 bar (3000 psi), 328 ml/Min maximum

working principle :

4 way 3 position valve

solenoid coil :

DL, DT04-2P, DG DIN43650

Valve Voltage :

12 or 24 voltage

Connector type :

ER or DG or DL , as reqeusted

valve block :

material : QT500-7 or 6061-T6 raw material

Temperature :

-40°C to 120°C, standard nitrile rubber seal

Coil initial current at 20°C :

Standard coil: 1.67 A at 12 VDC, Type E coil: 1.7 at 12 VDC

Installation torque :

maximum 27Nm, installation hexagon: S24

Brand :

Kaienli

Description

Product Pictures:

KSV10-47B-0-N Support OEM ODM hydraulic system design Chinese manufacture for hydraulic solenoid valve

Working principle:
When the power is off, the KSV10-47B-0-N cylinder oil port is connected, and ③ and ① are connected at the same time. When coil 1 is energized, it allows oil to flow from ③ to ④, and from ② to ①. When coil 2 is energized, oil can flow from ③ to ②, and from ④ to ①. In the oil circuit where the flow rate of the working oil port is unbalanced due to the area ratio of the oil cylinder, the return oil with a larger flow rate should be directed into the oil port ②. Although port ① can be fully pressurized, it is not used as the valve inlet. How to operate the emergency hand control option: During emergency operation, push the knurled handle to control the function of coil 2 (S2), or pull the knurled handle to control the function of coil 1 (S1).

Characteristics:
Working pressure: 240 bar (3000 psi)
Pressure resistance: 350 bar (5075 psi)
Flow: 22.7 lpm (6 gpm) maximum at 207 bar (3000 psi), 328 ml/Min maximum
Temperature range: -40°C to 120°C, standard nitrile rubber seal
Coil rated load: Continuous operation within 85% to 115% of rated voltage range
Initial coil current at 20°C: Standard coil: 1.67 A at 12 VDC, 115 VAC (full wave rectified)
0.18 A at a time. E-coil: 1.7 A at 12 VDC; 0.85 A at 24 VDC
Minimum pick-up voltage: 85% of rating at 207 bar (3000 psi)
Medium: Mineral oil with viscosity between 7.4~420cSt (50~2000ssu) or synthetic oil with lubricating effect
Valve hole: VC10-4;