Product Pictures:

KSV10-47BL-0-N four port spool valve + two connector hydraulic standard valve can exchange with Hydraforce

Characteristics:
Rated pressure: 315 bar, maximum pressure of 1 port is 210Bar,
Rated flow: 22.7L/Min
Leakage volume: Max. 328 ml/Min at 210 bar
Temperature range: -40°C to 120°C, standard nitrile rubber seal
Coil rated load: Continuous operation within 80% to 120% of rated voltage range
Coil initial current at 20°C: Type E coil: 1.5 A at 12 VDC; 0.75 A at 24 VDC
Minimum pick-up voltage: 70% of rated value at 315 bar
Medium: Mineral oil with viscosity between 7.4~420cSt (50~2000ssu) or synthetic oil with lubricating effect
Ferrule weight: 0.33Kg, single coil weight: 0.43Kg
Installation torque: maximum 34Nm, installation hexagon: S27
Valve hole: VC10-4;

Working principle:
When the power is off, the KSV10-47BL-0-N cylinder oil port is connected, and ③ and ① are connected at the same time. When coil 1 is energized, it allows oil to flow from ③ to ④, and from ② to ①. When coil 2 is energized, oil can flow from ③ to ②, and from ④ to ①. In the oil circuit where the flow rate of the working oil port is unbalanced due to the area ratio of the oil cylinder, the return oil with a larger flow rate should be directed into the oil port ②. Although port ① can be fully pressurized, it is not used as the valve inlet.
How to operate the emergency hand control option: During emergency operation, push the knurled handle to control the function of coil 2 (S2), or pull the knurled handle to control the function of coil 1 (S1).

Product technical data:

Product real pictures :

Company Exhibitions:

Our Certificate:

Product processing procedures:

Our new factory and workshop :

Our warehouse:

Shipment:

Different Series of Product , more details please contact us directly:

Hydraulic valves:

Welcome your visit and inquiry !