Product Pictures:
KSQMV series tubular type one way throttle check with G1/2 G3/8 /G1/4 G3/4 throttle flow relief valve
Technical Parameters:Features:
1. Directly connected to the valve body and pipeline to
save space
2. The valve body is made of 40Cr material and undergoes
heat treatment, which can withstand pressure shocks
within 420Bar.
3. The throttle hole is equipped with an anti-noise
structure to reduce noise.
4. Surface treatment: new nickel alloy plating, salt spray
5. Test can reach 500H
Throttle valves can have different designs depending on the specific application. In engines, a common type of throttle valve is the butterfly valve, which consists of a circular disc or plate that pivots about its center. When the throttle valve is fully open, the disc is parallel to the direction of fluid flow, allowing maximum flow. By partially closing the valve, the flow area is reduced, causing a restriction in the fluid flow.
Product technical data:
Product real pictures :
Company Exhibitions:
Our Certificate:
Product processing procedures:
Our new factory and workshop :
Our warehouse:
Shipment:
Type 1 | soloenid valve |
Type 2 | manual cartridge valve |
Type 3 | 2 way 2 position solenoid valve |
Type 4 | 2 way 6 position solenoid valve |
Type 5 | 2 way 8 position solenoid valve |
Type 6 | Pilot oil resource valve |
Type 7 | explosion proof valve |
Type 8 | balance valve |
Type 9 | check valve |
Type 10 | Hydraulic lock |
Type 11 | Valve manifolds |
Type 12 | valve block |
Welcome your visit and inquiry !