Product Description:

‌Features of Rexroth solenoid valves include:

‌Explosion-proof performance ‌: Rexroth solenoid valves are usually used to transmit flammable and explosive media, or are specially used in working conditions and environments in explosive and hazardous places. Different environments and fluids should choose solenoid valves with different explosion-proof levels. The coil housing has an explosion-proof function, can withstand gas pressure, has a preventive effect on the transmission of gas energy, and has high safety performance. ‌

Structural features ‌: Rexroth solenoid valves have a simple structure, a low failure rate, and meet industrial requirements. The use of traditional pneumatic valves requires piping, solenoid valves, and compressors to use, and the installation is simple and hassle-free. When driven by a motor, the opening and closing is smooth, and there is no disadvantage of excessive instantaneous impulse, and the failure rate can be greatly reduced. ‌

Working frequency and standard ‌: When the working frequency of the Rexroth solenoid valve is high, it is recommended to use a pilot solenoid valve, and the power supply should be DC.

The working system is divided into three types: long-term working system, repeated short-time working system, and short-time working system, which are suitable for different working needs. ‌ ‌ ‌

Fast action‌: The reaction speed of Rexroth solenoid valve can reach tens of milliseconds, with fast action, low power and light appearance‌.

‌Simple system‌: Compared with other types of actuators, Rexroth solenoid valves are low-cost and easy to install and maintain. It uses switch-type signal control and is easy to connect to engineering computers‌.

‌Precautions for use‌:

‌Installation requirements‌: The installation of the device must comply with the relevant provisions of the on-site safety regulations. During installation, it should be noted that the arrow on the valve body should be consistent with the flow direction of the medium, and it should not be installed in places where there is direct dripping or splashing water. The solenoid valve should be used within the fluctuation range of the power supply voltage of ±10% of the rated voltage‌.

‌Maintenance‌: It is recommended to install a manual gate valve at the front end of the solenoid valve to facilitate the future maintenance of the solenoid valve. After the solenoid valve is installed, it needs to be powered on several times to make it suitable for temperature before it can be officially put into use. When the solenoid valve fails or is cleaned, a bypass device should be installed for the system to continue to operate‌.

Explosion-proof environment: Products with corresponding explosion-proof grades must be selected in explosive environments. Waterproof and dust-proof varieties should be selected for outdoor installation or dusty occasions.

‌Medium characteristics: Use the correct liquid or gas medium according to the specifications and application requirements of the solenoid valve. Improper use of media may damage the solenoid valve and may pose a safety hazard.

‌Power supply and operation: Before installing, repairing or replacing the solenoid valve, be sure to disconnect the power supply and confirm that the power supply has been cut off. Follow the correct operating procedures, including the order of opening and closing the solenoid valve and the correct use of operating buttons or control devices.

These characteristics and precautions ensure the safety and reliability of Rexroth solenoid valves during use.

FAQ

Q1: Wonder if you accept small orders?
A1: Do not worry. Feel free to contact us .in order to get more orders and give our clients more convener ,we accept small order.

Q2: Can you send products to my country?
A2: Sure, we can. If you do not have your own ship forwarder, we can help you.

Q3: What's your payment terms ?
A3: By T/T,LC AT SIGHT,100% full payment.

Q4: How long is your production lead time?
A4:It depends on product and order qty. Normally, it takes us 15 days for an order with MOQ qty.

Q5: When can I get the quotation ?
A5: We usually quote you within 24 hours after we get your inquiry. If you are very urgent to get the quotation.Please call us or tell us in your mail, so that we could regard your inquiry priority.