Product Description:

The features of the Aventic pneumatic pressure indicator include the following:

Simple and lightweight structure: The pneumatic device has a simple and lightweight structure, and is relatively easy to install and maintain.

Safe use: The working medium is air, which is not easy to burn, and the exhaust treatment is simple, does not pollute the environment, and has low cost.

Easy to adjust the output force and working speed: The cylinder's action speed is generally less than 1 meter per second, which is faster than the action speed of hydraulic and electrical methods.

High reliability and long life: The pneumatic pressure indicator has high reliability and long life.

Precautions for use include:

Environmental requirements: Pneumatic valves require an ambient temperature range of -25℃ to 60℃ and a relative humidity of ≤95%. If the device is installed in the open air or at high temperature, waterproof and cooling measures should be taken. In places with vibration sources, stay away from the vibration source or add anti-vibration measures.

Installation requirements: Pneumatic valves should generally be installed vertically. In special cases, they can be tilted, but the angle should not be too large. Before installation, the pipeline should be cleaned to remove dirt and welding slag. After installation, the valve should be cleaned again to ensure that no impurities remain in the valve body.

‌Operation requirements‌: The pneumatic valve should be closed clockwise during operation, and the number of opening and closing revolutions should not be too many. The number of revolutions of large-diameter valves should be within 200-600 revolutions. For ease of operation, the maximum opening and closing torque should be 240N-m. The opening and closing operating end of the pneumatic valve should be a square tenon, with standardized dimensions and facing the ground.

‌Maintenance requirements‌: In order to enable the production process to continue in the event of a failure or maintenance of the pneumatic valve, a bypass pipeline should be added to the regulating valve. At the same time, attention should be paid to whether the installation position of the regulating valve meets the requirements of the process.

FAQ

Q1: Wonder if you accept small orders?
A1: Do not worry. Feel free to contact us .in order to get more orders and give our clients more convener ,we accept small order.

Q2: Can you send products to my country?
A2: Sure, we can. If you do not have your own ship forwarder, we can help you.

Q3: What's your payment terms ?
A3: By T/T,LC AT SIGHT,100% full payment.

Q4: How long is your production lead time?
A4:It depends on product and order qty. Normally, it takes us 15 days for an order with MOQ qty.

Q5: When can I get the quotation ?
A5: We usually quote you within 24 hours after we get your inquiry. If you are very urgent to get the quotation.Please call us or tell us in your mail, so that we could regard your inquiry priority.