Product Description:

Festo cylinders are widely used pneumatic components in the field of industrial automation, with a variety of advantages and features and precautions for use. The following are the general advantages and features of Festo cylinders and precautions for use:

Advantages and features of Festo cylinders

High-precision control:
Festo cylinders can achieve precise position control and are suitable for applications that require high precision.
Position detection can be performed through sensors such as proximity switches and magnetic switches to ensure the accuracy of the action.

Compact design:
The cylinder has a compact structure and saves installation space, which is particularly suitable for applications with limited space.
A variety of sizes and models are available to meet different needs.

High buffering performance:
Equipped with elastic buffer rings/pads at both ends, it can effectively reduce end impact and protect the cylinder and mechanical parts.
Provide a smooth buffering effect and extend service life.

Low friction coefficient:
Adopt high-quality materials and design to ensure low friction coefficient during operation and improve energy efficiency.
Reduce energy consumption and improve work efficiency.

Long service life:
The front and rear end covers are made of refined aluminum alloy, and the piston rod is made of high-alloy steel, which has good corrosion resistance and wear resistance.
High-quality seals are used to ensure long-term stable operation.

Flexible installation:
The installation position is optional and can be installed in any direction to adapt to a variety of application scenarios.
Provide a variety of installation methods, such as flange installation, thread installation, etc.

Wide working pressure range:
The working pressure range is usually 0.1 MPa to 1 MPa (1 bar to 10 bar), which is suitable for a variety of working scenarios.
Able to work stably under different pressure conditions.

Adaptability to a variety of working media:
Clean and dry compressed air can be used, and other neutral gases are also suitable.
Some models support lubricated media operation, but subsequent maintenance needs to be paid attention to.

Multiple variants:
A variety of variants are available, such as cylinders with magnetic pistons, piston rods with internal or external threads, etc., to meet personalized application requirements.
The appropriate model and configuration can be selected according to specific needs.

Precautions for the use of Festo cylinders

Working medium:
Ensure the use of clean and dry compressed air in accordance with ISO 8573-1:2010 [7:4:4] standard.
Avoid using air containing organic solvents, synthetic oils, salt or corrosive gases.

Working pressure:
The working pressure should be between 0.1 MPa and 1 MPa (1 bar and 10 bar).
Avoid exceeding the maximum working pressure to avoid damaging the cylinder.

Ambient temperature:
The working ambient temperature should be between -20°C and 80°C.
Appropriate protective measures are required under extreme temperature conditions.

Installation position:
The installation position is flexible, but it must be firmly installed to avoid vibration and impact.
Avoid applying additional lateral loads on the cylinder.

Lubrication requirements:
If working with lubricating media, lubricating media must be used continuously in the future.
Check the lubrication condition regularly to ensure good lubrication.

Side load:
Avoid the cylinder from being subjected to lateral loads exceeding the allowable value during operation.
If necessary, use guide devices or support structures.

Low temperature environment:
In low temperature environments, anti-freeze measures should be taken to prevent the water in the system from freezing.
Ensure that the water in the system can be discharged in time to avoid ice.

Regular maintenance:
Regularly check the sealing and working condition of the cylinder, and replace damaged parts in time.
Regularly clean the impurities and dust inside the cylinder to ensure the normal operation of the cylinder.

Disassembly and storage:
If the cylinder is not used for a long time after being disassembled, appropriate protective measures should be taken.
Store in a dry and clean environment to avoid moisture and corrosion.

Proximity switch working range:
Pay attention to the working range of the proximity switch to ensure the accuracy of position detection.
Regularly check the performance of the proximity switch to ensure its normal operation.
Through the above advantages and precautions, you can better use and maintain the Festo cylinder to ensure its efficient and stable operation.

FAQ

Q1: Wonder if you accept small orders?
A1: Do not worry. Feel free to contact us .in order to get more orders and give our clients more convener ,we accept small order.

Q2: Can you send products to my country?
A2: Sure, we can. If you do not have your own ship forwarder, we can help you.

Q3: What's your payment terms ?
A3: By T/T,LC AT SIGHT,100% full payment.

Q4: How long is your production lead time?
A4:It depends on product and order qty. Normally, it takes us 15 days for an order with MOQ qty.

Q5: When can I get the quotation ?
A5: We usually quote you within 24 hours after we get your inquiry. If you are very urgent to get the quotation.Please call us or tell us in your mail, so that we could regard your inquiry priority.