Product Description:

Advantages and features of Orbital Motor​

Excellent performance: adopts shaft flow distribution design, can work smoothly in a wide range of speed and torque.

Compact structure: small size, light weight, easy to install and use, suitable for applications with limited space.

High efficiency: optimized stator design, improved motor efficiency.

Strong reliability: built-in check valve, can reduce the pressure of internal seal, thereby increasing product life. Its unique stator design with pin-tooth provides reliable and efficient energy output for various terminal applications.

Wide application: suitable for a variety of application scenarios, such as mobile, industrial and agricultural markets, including car washers, food processing equipment, conveyor belts, machine tools, agricultural equipment, road sweepers, sliding attachments, etc.

Flexible installation: with a variety of installation methods and output shaft options, it can be widely used in different working conditions.

Strong durability: standard high-pressure shaft seal has excellent sealing life and performance.

Advanced technology: has relevant patents, such as "a cycloid hydraulic motor suitable for multiple scenarios", which enhances the connection reliability of the equipment.

Precautions for using Eagle Cycloidal Motors

Installation:
The mounting bracket must be sufficiently rigid and the motor must not vibrate.
The output shaft of the motor must be coaxial with the center line of the connected coupling.
When the motor's oil inlet and oil return are steel pipes, the stress on the pipeline must be completely removed to ensure that the pipeline does not exert any force on the motor.
When connecting the drain pipe, the resistance of the return oil should be controlled below 0.3MPa. The return oil pipe should be connected to the oil tank separately and must not be connected in series with other return oil pipes.
Before starting the motor, you must first inject enough clean hydraulic oil into the motor housing from the two oil ports, and then rotate the output shaft. If there is no abnormality, you can install it.
The radial load on the motor output shaft must not exceed the specified limit.

System design:
The intermittent working pressure of the motor refers to the maximum working pressure that the motor oil inlet can withstand; and the continuous working pressure refers to the pressure difference between the oil inlet and the oil return port.
The motor cannot be used at maximum speed and maximum pressure at the same time.
Under intermittent working conditions, the motor should not run for more than 10% per minute.
The maximum oil temperature is 80℃.
The shaft seal assembly used in the cycloidal motor can usually withstand higher working pressures, but in order to ensure good service life and overall mechanical properties, it is recommended that the back pressure does not exceed 5MPa. If the back pressure exceeds this range, it is recommended to connect the external leakage oil pipe.
Before the motor reaches full load, it should be run-in. It is recommended to run-in at less than 30% of the maximum working pressure for 1 hour.

Usage and maintenance:

After the motor has been running for about 200 hours, the oil should be replaced and the oil filter should be cleaned.

If the oil is too viscous, it may cause cavitation in the oil pump when starting in cold weather, thereby damaging the oil pump.

When selecting hydraulic oil, all components in the system must be considered and adjusted appropriately to obtain the best viscosity range.

If the color of the oil turns black, it may indicate an overheating problem.

If the oil is emulsified, there may be water contamination.

When the system temperature is low, pay attention to the indication of the fluid level.

FAQ

Q1: Wonder if you accept small orders?
A1: Do not worry. Feel free to contact us .in order to get more orders and give our clients more convener ,we accept small order.

Q2: Can you send products to my country?
A2: Sure, we can. If you do not have your own ship forwarder, we can help you.

Q3: What's your payment terms ?
A3: By T/T,LC AT SIGHT,100% full payment.

Q4: How long is your production lead time?
A4:It depends on product and order qty. Normally, it takes us 15 days for an order with MOQ qty.

Q5: When can I get the quotation ?
A5: We usually quote you within 24 hours after we get your inquiry. If you are very urgent to get the quotation.Please call us or tell us in your mail, so that we could regard your inquiry priority.