Movable Greenhouse Hydroponic Flood Table With Rolling Benches
Product Description
Working principle of greenhouse rolling benches
A sub-irrigation system is essentially a series of pipes and drip emitters buried beneath a plant's growing medium. Water is pumped to the bottom of the container where roots find and uptake it. This is opposed to traditional overhead watering systems where water is applied to the tops of roots, and flows downwards. Greenhouse rolling benches can be labor-saving while encouraging both water and nutrient conservation because water doesn't leach out of the container or planting box. Additionally, because plants receive water directly through their roots, this type of irrigation system using greenhouse ebb and flow benches prevents powdery mildew and other forms of diseases that form when the stems or leaves of the plants are overly exposed to water.
The advantages
1. Water tray: U.A. resistant, original ABS plastic cap over a 100% recycled ABS plastic core; these trays are recyclable.
2. Hand wheel: Manual drive, It's convincing to move the top 60cm from left to right. The utilize of greenhouse area is upon 50%.
3. The standard height is 75cm and can be adjust up and down 10cm.
4. Heavy-duty bench leg: Hot-dipped galvanized finished, The life above 20 years.
5. Greenhouse Roling Benches border for the aluminum alloy, reduce the weight for the frame. Easily to operate and move.
6. All plants are watered simultaneously and evenly providing better plant growth
7. Crop growth cycle is typically reduced by 1 to 2 weeks
8. Retail areas remain clean and dry and clear of hoses
9. Dry floors and plant foliage make it easier to control relative humidity
Specification
Product | Greenhouse Rolling Benches |
Sizes | 3x6ft, 4x8ft, 4x10ft, 5x10ft, 4x12ft, 5x12ft, Customizable |
Tray Material | Food grade ABS plastic |
Tray Thickness | 3mm |
Frame | Aluminum alloy |
UV Protective Ability |
Yes |
Height of Table | 60~80cm |
Feature | 1) Manual drive, ease operation and movement. Greenhouse rolling benches border for the aluminum alloy, the surface treatment of steel pipe bracket portion and seed bed networks are hot dip galvanizing, particularly suitable for hot and humid environment greenhouse. 2) Plant Trellis Supports are manufactured with galvanized steel to prevent rusting and corrosion. All greenhouse plant supports consist of uprights that are attached to the grow bench side rails and are connected by a rigid cross bar that has a thumb screw on each upright post for easy height adjustment. 3) The range of Trimming is 300mm, the utilize of greenhouse area is upon 80%. 4) Anti-tilt device prevent the problem of inclination caused by emphasis. 5) UV Protective Ability. 6) Using life 10-15 years. |
FAQ
Q. Are the rolling bench can horizontal adjustment?
A: Yes, it can adjust 1-7cm.
Q. What's the weight load of greenhouse rolling bench?
A: Standard is 70-90kg, the weight load can be customized.
Q. What's the height of rolling bench and trays?
A: The standard height of rolling bench is 60-70cm, the inside height of tray is 7cm, outside height is 9cm.
Q. How do I install the structure or is your company to help us install it?
A: It is easy to install. We send install video or manual to you. Or welcome visiting our factory. We will guide you how to install it in our factory.