2MW Francis Water Turbine Alternative Power Hydro Turbine Generator
Francis Hydro Turbine Generator Feature:
Francis turbines may also be used for pumped storage, where a reservoir is filled by the turbine (acting as a pump) driven by the generator acting as a large electrical motor during periods of low power demand, and then reversed and used to generate power during peak demand. |
Application | Francis Water Turbine Generator |
Water head | 20 ~ 650m |
Output | 0.05 ~ 30MW |
Frequency | 50/60HZ |
Runner diameter | 0.5 ~ 10m |
Life Span | 30-50 years |
Product Introduction
1. Francis water turbine generator can be designed for a wide range of heads and flows and are the most common water turbine in use today.
2. The Francis water turbine generator has the characteristics of simple structure, small size, low cost, high efficiency at full capacity (typically over 90%), stable in running, applicable to a wide range of water heads.
3. The Francis water turbine generator is a type of reaction turbine, a category of turbine in which the working fluid comes to the turbine under immense pressure and the energy is extracted by the turbine blades from the working fluid. |
Francis Hydro Turbine Generator Parameters:
Power Range | 1300-4200 KW |
Water Head | 41-89 m |
Flow Rate | 3.21 m3/s - 5.03 m3/s |
Material | Steel plate/Stainless steel |
Speed range | 600-750 rpm |
Installation method | Horizontal installation / vertical installation |
Frequency | 50hz/60hz |
Efficiency | 89%-92% |
Guide vane | Counter Weight |
Application | On-grid/Off-grid |
Francis Hydro Turbine Generator Pictures:
Other Prosucts
Low Head High Flow | High Head Low Flow |
![]() | |
Power 450-1700 KW | Power 1000-5000KW |
Water Head 6-15 m | Water Head 250-440m |
Flow Rate 8.4-12.64 m3/s | Flow Rate 0.51-1.14m3/s |
Advantage | Advantage |
1. Kaplan hydro turbine generator suitable for water head below 25m.
2. The hydraulic loss of the passage is reduced and the construction is convenient.
3. Kaplan hydro turbine generator suitable for reversible pump-turbine operation, has good hydraulic performance.
4. Kaplan hydro turbine generator suitable for comprehensive development and utilization of low head hydraulic resources. | 1. Turgo hydro turbine mainly by the nozzle and runner, and so on.
2. The turgo hydro turbine has the advantages of simple structure, low cost and low efficiency.
3. Horizontal small water turbine unit has the advantages of a simple structure, easy maintenance, reduce plant height, reduce the excavation depth.
4. Turgo hydro turbine unit can install multiple nozzles on the wheel,high specific speed, the same capacity unit size is relatively small and weigh lightly. |
Why Choose Us:
1. We can provide the complete equipment, including: Hydro Turbine, Generators, Inlet Valve, Governor, Computer Control Panel, and other ancillary equipment.
2. We have Microcomputer digital speed governor.
3. Our Low voltage (400V) Generator can be controlled by microcomputer monitor system. ( A key to boot, and a key off)
Our Main Products Included:
(1) Efficititive Francis turbine. (2) High head Pelton turbine. (3) Simple structure Kaplan turbine. (4) Tubular turbine. (5) Turgo turbine. |
Q1, Which turbine generator should I choose? Our products are all customized, so please tell me your water head, flow rate, frequency, total power, voltage, on grid or off grid operation, we will make a suitable solution for you. Q2, Can your factory provide all the equipment for turbine generator? Yes, we can provide you with hydro turbines, hydro-generators, pressure regulators, water turbine wheels, control panels, transformers, monitoring systems and more. |
Q3, How about your products' quality? We have a very strict quality controlling system which promises that goods we produced are always of the best quality, and our products have sold in 50 areas abroad. They are very popular with the users there. Q4, Do you have own factory? Yes we have. We are a manufacturer of hydro turbine generators and have own factory. We started to promote the international market in 2013. Our factory is located in Sichuan, where China's water conservancy and hydropower is most developed. Welcome to visit our factory in China. |
Q5, How to order? Q6, How long is the delivery time? Delivery times range from 15 days to 6 months depending on which hydro turbine generator you are purchasing. Q7, How to transport the goods? |
Our hydro turbine generators are all customized products. We could design hydro turbine generator according to your requirement. Could you give us the following parameters so that we could make a professional solution for your project.
1.Flow rate ( lit/sec or m³/sec?) 7. Voltage of transmission line if it is on grid( V?) |
By the way,could you tell me your whatsapp number(phone number) ?