High Efficiency 2mw to 5mw High Voltage 6300v - 35kv Francis Turbine Generator Unit For HPP

Our main products included:

1. Kaplan turbine generators series.

2. Turgo turbine generators series.

3. Tubular turbine generators series.

4. Francis turbine generators series.

5. Pelton turbine generators series.

Product features :

Francis turbine is a kind of counter-attack turbine, invented by American engineer Francis in 1849, also known as Francis turbine, or radial flow turbine. Water flows radially into the runner, and then flows out approximately axially. The runner consists of a crown, a ring and a blade.

Francis turbine has wide application head (about 20-700m), simple structure, stable operation and high efficiency, and is the most widely used type of turbine in modern times.

1.Francis turbine has the advantages of compact structure, high efficiency and can adapt to a wide range of water head of turbine type.

2.When the water flow through the turbine wheel, it enters to radial, axial flow, so it is also called the radial axial flow turbine;

3.Francis turbine is also called the Francis turbine. The water flow from the surrounding radial inflow runner, then approximate axial flow runner, runner by the crown, under the ring and the blade;

4.It is applicable to the head from a range of 20 meters of up to 700 meters, has the advantages of simple structure, stable operation, and high efficiency, but it is generally used in the head in the range(50 to 400 meters). Single output from tens of KW to several 101000 tile. At present this kind of turbine maximum output has exceeded 700000 kilowatts. A turbine is one of the most extensively used.

5.Francis hydro turbine generator unit is one of our common hydraulic turbines. It consists of hydraulic turbines, generators and other basic components.

Product parameters:

Product pictuers:

Installation design drawings: