Micro Low Water Head Kaplan Water Turbine Generator Unit Auto Control For Hydro Power Plant
Our main products included:
1. Kaplan turbine generators series.
2. Turgo turbine generators series.
3. Tubular turbine generators series.
4. Francis turbine generators series.
5. Pelton turbine generators series.
Product features:
The axial flow turbine runner is composed of a runner body, a blade and a water discharge cone. The number of blades is less than that of the mixed flow type, and the blade axis is perpendicular to the axis of the turbine. It is suitable for hydropower stations with medium and low heads and large flow. Under the same head, the specific speed is higher than that of the Francis turbine. The application head is approximately 3 to 80 m. The flow of water changes from radial flow to axial flow between the vanes and the runner, while in the runner region, the flow remains axial.
1. Suitable for the development of low water head (2-30m) larger flow of water resources;
2. Appliceable to large and small head change load changes of power plant;
3. For the low head,head and power changed greatly power station,can stably under various working conditions;
4. This machine is a vertical shaft device,has the advantages of simple structure,convenient repair,equipment,low price,easy to realize the direct drive etc.
Product parameters:
ZD-LM(Y)-Kaplan tubine generator unit | Generator | Gevernor or Regulating work | |||||
Turbine | |||||||
Type | Water head(m) | Discharge (m³/s) | Speed (r/min) | Power(kw) | Efficiency(%) | ||
ZDJP502-LH-120 | 6 | 6.35 | 300 | 334.5 | 89.7 | SF320-20/1180 | YT -6000 |
7 | 6.36 | 397.6 | 91 | SF400-20/1730 | |||
8 | 6.48 | 462.5 | 91 | SF400-20/990 | YT -6000 or YWT-10000 | ||
9 | 7.34 | 577.14 | 89 | SF500-20/1730 | |||
10 | 7.83 | 375 | 695.4 | 90.5 | SF630-16/1730 | ||
11 | 7.98 | 783.2 | 91 | SF800-16/1730 | |||
12 | 7.98 | 855 | 91 | SF800-16/1730 | |||
13 | 8.05 | 983.7 | 91 | SF 1000-16/2150 | |||
14 | 9.16 | 1119.6 | 89 | SF 1000-16/2150 | |||
15 | 9.2 | 12.5.2 | 89 | SF1250-16/2150 | YWT-18000 | ||
ZDJP502-LH-140 | 6 | 8.4 | 250 | 447.5 | 90.5 | SF400-24/1730 | YWT-10000 |
7 | 8.4 | 527.5 | 91.5 | SF500-24/990 | |||
8 | 8.5 | 613.1 | 91.5 | SF630-24/2150 | |||
9 | 10.05 | 300 | 811.9 | 91.5 | SF800-20/2150 | YWT-18000 | |
10 | 10.22 | 918 | 91.5 | SF800-20/2150 | |||
11 | 10.27 | 1014.1 | 91.5 | SF1000-20/2150 | |||
12 | 12.56 | 1323.4 | 89.5 | SF1250-20/2150 | |||
13 | 12.57 | 375 | 1443.8 | 90 | SF 1250-16/2150 | ||
14 | 12.61 | 158531 | 91.5 | SF 1600-16/2150 | |||
15 | 12.64 | 1701.8 | 91.5 | SF1600-16/2150 | |||
ZDJP502 -LH-160 | 6 | 10.7 | 214.3 | 579.4 | 92 | SF630-28/2150 | |
7 | 10.72 | 677.3 | 92 | SF630-28/2150 | |||
8 | 10.74 | 775.4 | 92 | SF800-28/2150 | |||
9 | 12.67 | 250 | 1029.3 | 92 | SF1000-24/2150 | YWT-18000 | |
10 | 12.69 | 1253.8 | 92 | SF1250-24/2150 | |||
11 | 12.74 | 1264.3 | 92 | SF 1250-14/2150 | |||
12 | 15.08 | 1632.7 | 92 | SF1600-20/2150 | |||
13 | 15.23 | 300 | 1786.9 | 92 | SF1600-20/2150 | ||
14 | 15.33 | 1936.5 | 92 | SF2000-20/2150 | |||
15 | 15.37 | 2080.5 | 92 | SF2000-20/2150 | |||
ZDJP502-LH-180 | 6 | 14.2 | 200 | 760.5 | 90.7 | SF800-30/2600 | YWT -30000 |
7 | 14.3 | 904.4 | 92 | SF800-30/2660 | |||
8 | 14.48 | 1045.4 | 92 | SF 1000-30/2600 | |||
9 | 17 | 1460.6 | 92 | SF 1250-30/2600 | |||
10 | 17.18 | 250 | 1593.9 | 91.4 | SF 1600-24/2600 | ||
11 | 17.99 | 1669.8 | 92 | SF 1600-24/2600 | |||
12 | 21.69 | 2318.8 | 90 | SF2000-20/2600 | |||
13 | 21.81 | 300 | 2480.5 | 90 | SF2500-20/2600 | ||
14 | 21.46 | 2681.8 | 91 | SF2500-20/2600 | |||
15 | 21.46 | 2904.9 | 92 | SF3200-20/2600 | |||
ZDJP502-LH-200 | 6.9 | 17.65 | 166.7 | 89 | 1000 | SF 1000-36/2600 | YWT-18000 |
8.1 | 19.02 | 187.5 | 89.5 | 1329 | SF 1250-32/2600 | ||
9.5 | 20.64 | 88.5 | 1702 | SF 1600-32/2600 | YWT -30000 | ||
11 | 22.24 | 200 | 89 | 2127 | SF2000-30/3250 | ||
12.8 | 23.96 | 88.2 | 2662 | SF2500-30/3250 | |||
15.1 | 26.01 | 250 | 89.2 | 3404 | SF3200-24/3250 | YWT -38000 |
Product pictuers:
Design schematic:
Q1, Which turbine should I choose?
Please tell me the water head, flow rate, frequency, Total power you need
, voltage, on grid or off grid operation, we will propose a solution.
Q2, Can your factory provide all the equipment for hydropower generation?
Yes, we can provide you with turbines, hydro-generators, pressure regulators, turbine wheels, control panels, transformers, monitoring systems and more.
Q3, Can you do EPC for a hydroelectric power plant?
Yes, we can provide TURN-KEY and EPC services including measurement, design, manufacturing, construction, manufacturing, commissioning, inspection, maintenance runner replacement and refurbishment/upgrade/improvement/repair/refurbishment of turbines/generators including bearings, seals For parts and key parts, we will send technicians and workers to install equipment.
Q4,Is your company a trading company or a manufacturer?
We are a manufacturer of hydro turbine generators and started to promote the international market in 2013. Our factory is located in Sichuan, where China's water conservancy and hydropower is most developed. Welcome to visit our factory in China.
Q5, What is an acceptable MOQ?
For this product, our acceptable MOQ is 1 set.
Q6,How long is the delivery time?
Delivery times range from 15 days to 6 months depending on the model you are purchasing.
Q7,Does your company have its own independent official website?
Of course, and we can see more information about our company and products on our official website.
website:www.fstgenerator.com