Made In China Best Supppler 5 - 15m Low Head Suitable For Hydro Tubular Turbine For River

Our main products included:

1, Kaplan turbine generators series

2, Turgo turbine generators series, e.g. vertical type and horizontal type.

3, Tubular turbine generators series, e.g. Bulb type and shaft extension type

4, Francis turbine generators series

5, Pelton turbine generators series and double turbine generators series and so on.

Product features:

The Bulb tubular tubine unit mounts the generator rotor on the rotating turbine wheel rim, which is fixed to the support around the outside of the runner.

The full-flow unit has a large moment of inertia, which can ensure the stable operation of the unit and avoid frequency fluctuations. It is more advantageous for tidal power stations with frequent head changes. At the same time, the flow channel and unit layout are suitable for reversible units, and can also be used for pumping and storage. The upstream and downstream reservoirs of the run-of-flow cascade power station can be used as the upper and lower reservoirs of the pumped storage power station, and the original hydraulic construction and electromechanical equipment can be used. The ordinary power station will be built into a hybrid hydropower station capable of pumping water storage and generating electricity, and improving the compensation function of the run-off power station in the power system. The tubular unit can also be used in the irrigation and drainage station to receive the double benefits of drainage and power generation.

1, Power station from water to water direction is basically the axial direction penetration.such as bulb turbine hydropower station of the feed water control and outlet pipe bend, simple shape, the path of circulation of hydraulic damage reduction,convenient construction .

2, Tubular turbine has high flow ability and larger specific speed, so when the head and power are under the same conditions,tubular turbine diameter is about 10% smaller than Turn to paddle

3, Hydro-power unit structure is compact,compared with the same specifications of paddle unit,Its size is small,and it can be decorated in dam body,cancel the complex diversionsystem,reduce the construction area of factory building,reduce the excavated volume and the amount of concrete,according to the relevant data analysis,construction cost can be saved 20%-30%.

4, Tubular turbine work for reversible pump turbine running, due to the in and out of the water without a sharp turn working condition of pump and the turbine can get a better hydraulic performance.Such as tidal power station can be two way with applications in power generation,pumping,drainage and other three kinds of functions.Therefore,it is suitable for comprehensive exploitation and utilization of low head hydraulic resource.

5, Hydro-power is short in construction period, and results fast generally than vertical axial-flow hydro-power station .

6, The Tubular Turbine is a new type of unit that develops low head hydraulic resources and is suitable for heads below 25m. The flow path of the model is linear, and is a horizontal-axis hydraulic turbine. The shape of the runner is similar to that of the axial flow type, and there are also fixed and rotary propellers. Since the water flow moves substantially in the axial direction without turning in the flow passage, Larger improvements in the unit's water capacity and hydraulic efficiency.

Product parameters:

Product pictures: