High efficiency 10p 26kw cooling capaicty 380V water cooled chiller for cooling heating system

Contact: Alinna | Heat Pump Professional Provider
Mobile/Wechat: +86 13922152741

Water Cooled Chiller Parameters:

Rated input power:9.2KW
Rated cooling capacity :26KW
Rated voitage:380V
Rated frequency:50HZ
Rated current :18A
Rated outlet water temperature :12℃
The lowest outlet water temperature: 7 ℃
Compressor:Copeland
Remarks:The test conditions of above parameter :dry bulb temperature :20℃,wet bulb temperature :17℃, Initial water temperature 15℃

Water Cooled Chiller Product Photos:

About as

1). We were established in 2001.

2).We are a professional heat pump manufacturer,Located arround baiyun Air port

3). We are trading on Meeting Brand ,Meeting heat pump Well-know brand we operate in Europe market

4). Our company has been inspected and certificated by TUV and SGS.

5). We are the one of the first manufacturers whose heat pumps are with top COP gaining grants from Chinese government.

6). We pass ISO9001 quality management system and ISO14000 environment protection system

7). Our testing laboratory can test heat pump up to 60KW heating capacity and create testing air temperature condition during -25DegC~45DegC,according to EN14511 standard.

9). Our leading products: Air to water heat pump , DC inverter heat pump, High water temperature heat pumps

Monoblock house heating heat pumps ,Split heat pump ,Super low noise heat pump

Heat pump dryer ,Ground source heat pump , water to water heat pump , swimming pool heat pump

QC
1 . Complying with ISO standard. Quality Ensured .

2 . Complete Inspection for each unit before out of factory , covering water system and electricity detection and testing , ensuring 100 % right product before shipment .

3 . Strict quality control during production . We have liquid soap detection , halogen detection , electrical detection and water - soaking detection during production to avoid gas leakage and electrical problems .

4 . Full inspection on bigger parts such as compressors, condensers, evaporators, expansion valves , flow switches, controllers etc .. Selection inspection for small parts such as sensors, pressure switches etc ..

FAQ

Q1. Can I have a sample order for Heat pump or Water tank?

A: Yes, we welcome sample order to test and check quality. Mixed samples are acceptable.

Q2. What about the lead time?

A:Sample needs 3-10days, mass production time depend on the products'quantity.

Q3.Do you offer guarantee for the products?

A: Yes, 12 months since the heat pump depart from the port of loading (Refer to the Bill of Lading).

Certificsate we have got :

• ISO 9001, ISO 14000
• Our company has been inspected and certificate by EMC
• CE And EN14511, EN 14825-ERP for heat pump exported to europe
• Energy label for all heat pump models sold to oversea market
• Testing laboratory calibrated by CNAS

Our leading products

Air to water heat pump , DC inverter heat pump, High water temperature heat pumps

Monoblock house heating heat pumps ,Split heat pump ,Super low noise heat pump

Heat pump dryer ,Ground source heat pump , water to water heat pump , swimming pool heat pump