5P High Temperature Heat Pump Waste Heat Recovery Machine ISO Standard

Technology Specification

1. Complying with ISO standard. Quality Ensured.

2. Complete Inspection for each unit before out of factory, covering water system and electricity detection and testing, ensuring 100% right product before shipment.

3. Strict quality control during production. We have liquid soap detection, halogen detection, electrical detection and water-soaking detection during production to avoid gas leakage and electrical problems .

4. Full inspection on bigger parts such as compressors, condensers, evaporators, expansion valves, flow switches, controllers etc.. Selection inspection for small parts such as sensors, pressure switches etc..

5. Well noise control by using mute cotton for casing plates and soft rubber feet for floating compressors, some of the models use compressor isolation shields.

6. Well insulated with insulated cotton for every pipe and parts, include compressor, dryer filter and each pipes.

7. We have passed TUV and SGS inspections. We have CE, RoHs, IEC, CCC, CB certificates for most of our products. Some of our products have en14511 test, en14825 test.

Meeting EVI low ambient temperature air to water heat pump is designed for house heating as well as sanitary hot water in cold area, including North Europe and East Europe. This is one of the best air source heat pumps for cold area currently, with reliable operation at -25DegC ambient temperature, and the COP at -15DegC ambient temperature is up to 2.5

Features:

1. Copeland EVI scroll R407C compressor.

2. Designed for central heating for houses in cold area including North Europe and East Europe.

3. Can work stably at -25DegC ambient, and the COP at -15DegC ambient is up to 2.5.

4. Can work with auxiliary heater.

5. Using electronic expansion valve, achieving accurate, stable and high efficiency throttling.

6. Split design, no water system outside, no freezing and damage to water system. Optional refrigerant pipe quick connection is available, to reduce installation cost.

7. Low noise design for the outdoor unit. The compressor is on a floating plate to reduce vibration at the most extent. Noise insulation inside the cabinet. The fan is extremely quiet.

8. The refrigerant connections are designed to allow hiding all pipes, wires into the ground to ensure good looking installation.

Guangzhou Jinlun Electric Equipment Co., Ltd. develop and produce heat pump, include air to water heat pumps and ground source heat pumps.

Meeting engergy efficiency EVI low ambient temp air to water heat pump ,with CE certification , ECM test report by EN14511 , can be used at -25 degree ambient temperature thanks to EVI technology .

Meeting heat pump Main parts :

Copeland R410A /R417A/R407C compressor

Aluminum finned copper coil heat exchanger

High efficiency Stainless Steel plate heat exchanger (Swep/GEA is option )

Saginomiya electronic expansion valves for throttling and EVI ,optimize performance

Carel pressure transducers

Sanhua 4 way valve

Built-in differential pressure flow switch

Meeting self-developed controller with remote control, user-friendly interface ,easy to understand and operate.

Good look and long lasting galvanized sheet or stainless steel cabinet

R410A refrigerant is pre-filled inside indoor unit.