commercial industrial Meeting swimming pool heat pump

Swimming pool heat pump

Meeting swimming heat pump is the most popular and energy saving swimming pool heating solution, which use much less electricity to transfer up to 5 times heat energy from the ambient air to heat the pool water. We supply a very wide capacity range heat pump from 6kw/hour to 450kw/hour, and custom designs for projects are also available thanks to our 17 years experience on heat pump technology.

Cooperate Partner

A. Payment service

1. T/T

2. L/C (for container order only)

B. Technical service

1. We calculate the capacity and recommend the best models.

2. We supply you the professional refrigeration technical support and electronic technical support for your installation, debugging and operation.

3. We supply the spare parts and technical support in and after the warranty time.

4. We supply the training course to your workers at our factory if you need.

5. We can offer site training to your workers in your place which is negotiable.

C. After-sales service

1. Technical support for your installation, operation and maintenance.

2. Standard warranty time: One years’warranty for heat pumps

You can also pay for extended warranty or we can renegotiate the longer warranty period.

1. Spare parts and technical support at most economic prices after the warranty.

QC:

1. Complying with ISO standard. Quality Ensured.

2. Complete Inspection for each unit before out of factory, covering water system and electricity detection and testing, ensuring 100% right product before shipment.

3. Strict quality control during production. We have liquid soap detection, halogen detection, electrical detection and water-soaking detection during production to avoid gas leakage and electrical problems.

4. Full inspection on bigger parts such as compressors, condensers, evaporators, expansion valves, flow switches, controllers etc. Selection inspection for small parts such as sensors, pressure switches etc.

5. Well noise control by using mute cotton for casing plates and soft rubber feet for floating compressors, some of the models use compressor isolation shields.

6. Well insulated with insulated cotton for every pipe and parts, include compressor, dryer filter and each pipes.

7. We have passed TUV and SGS inspections. We have CE, Ro HS, IEC, CCC, CB certificates for most of our products. Some of our products have en14511 test, en14825 test.

FAQ

Q1. Can I have a sample order for Heat pump or Water tank?

A: Yes, we welcome sample order to test and check quality. Mixed samples are acceptable.

Q2. What about the lead time?

A: Sample needs 3-10days, mass production time depend on the products' quantity.

Q3. Do you offer guarantee for the products?

A: Yes, 12 months since the heat pump depart from the port of loading (Refer to the Bill of Lading).

Our leading products

Air to water heat pump, inverter heat pump, High water temperature heat pump.

Heat pump dryer, Ground source heat pump, water to water heat pump, swimming pool heat pump

Mono block house heating heat pumps, Split heat pump, super low noise heat pump

Heat pump dryer, Ground source heat pump, water to water heat pump, swimming pool heat pump

Meeting heat pump Main parts :

1.Copeland R410A /R417A/R407C compressor

2.Aluminum finned copper coil heat exchanger

3.High efficiency Stainless Steel plate heat exchanger (Swep/GEA is option )

4.Saginomiya electronic expansion valves for throttling and EVI ,optimize performance

5.Carel pressure transducers

6.Sanhua 4 way valve

7.Built-in differential pressure flow switch

8.Meeting self-developed controller with remote control, user-friendly interface ,easy to understand and operate.

9.Good look and long lasting galvanized sheet or stainless steel cabinet

10.R410A refrigerant is pre-filled inside indoor unit.