16.5Kw 380V High Quality PVDF HDPE Hydraulic Polyethylene Butt Fusion Welding Machine

Description

1. Suitable for welding of plastic pipes and fittings made of HDPE PVDF and MPP in worksite of workshop.

2. Consists of basic frame hydraulic unit, planning tool, heating plate and support for planning tool & heating plate and optional parts.

3. Removable PTFE coated heating plate with high accurate temperature control system.

4. Eletric planning tool with safety limit switch enables to start it only when it's locked in operation position.

5. Slant design for basic frame.

6. Low starting pressure and high reliable seal structure.

7. Changeable welding position brings more convenience while welding various fittings.

8. Seperate two-channel yimer records times in soaking and cooling phases.

9. High-accurate and shockproof pressure meter indicates clearer readings.

Technical Parameters

Common problems of various components of the hot melt machine when connecting PE pipes:

1. Heating plate

① Wear anti-cutting gloves

② Pay attention to the safety precautions of the actual operating staff. After the welding is completed, it should be placed in a special heating plate support frame.

③ The heating plate should be cooled before transportation to prevent fire.
④ After the electric welding is completed, put the heating plate in a safe area to prevent others from accidentally touching the burn.

⑤ Grasp the door handle when lifting the heating plate. Do not disconnect the switching power supply of the heating plate. Remember not to touch the heating plate with force

2. Milling cutter

① Before cutting the pipe (piece), make sure that the end face of the pipe (piece) is clean and free of dirt to prevent damage to the cutting blade ② Pipe (piece) cutting After the end, after the milling cutter disc stops rotating, take out the milling cutter disc and store it.

③ Hold the door handle when obtaining the milling cutter disc.

④ The milling cutter disc can only be rotated when it is installed on the welding frame. Do not arbitrarily adjust the toggle switch of the milling cutter

3. Hydraulic control cabinet

① Install the hydraulic components horizontally and firmly during operation, gradually charge the pipe to detect the drag force of the pipe, and lift the handles on both sides during transportation

② Remember not to place the hydraulic components perpendicular to the pipe. Place it to prevent oil leakage.

③ When making adjustments to this component, follow the relevant requirements of this manual, such as Instructions for Use

4. Frame

① Check the parts/materials to be welded to ensure that they are accurately clamped on the frame , to ensure the welding quality of electric welding. When heating, the actual operating staff should stand off the welding machine moderately.

② During electric welding, if the movable chuck and the fixed chuck collide, it is not necessary to use the main gate of the welding machine to shut down, only move the work The pressure adjustment lever can open the chuck.

③ When transporting the rack, make sure that the chucks are all tightened to prevent them from falling off.

Our service:

1) We offer 1 year warranty and free spare parts. (Except for wearing parts)

2) We offer voltage and frequency of motor customization service, such as 110v 60hz.

3) We can put your LOGO on machine plate or packing (need your authorization on brand)

4) Machine can be shipped to overseas or domestic place by sea or air in LCL or FCL.