3.2m IBP Transducer Cable For Simens 10 Pin To Utah transducer

Installation and Operation Instructions

1) Environmental conditions for normal use: temperature + 5 ° C to + 55 ° C, relative humidity no more than 80%, atmospheric pressure 700 HPA ~ 1060 HPA;

2) The cable should be placed in a position that does not affect the measurement and ensure the patient's safety;

3) Connect the sensor to the sensor coupling end of the cable according to the requirements of the invasive sensor manual;

4) If the invasive blood pressure of the monitor can not return to zero, please reconfirm whether the cable connection is correct or replace with a new sensor.

Transportation and Storage

• IBP cables can be transported by conventional aircraft, trains and automobiles, and violent collision shall be prevented during transportation and shall not be place with corrosive substances.

• Before use, IBP cable must be placed in the original package to prevent improper corrosion and lead shorten the service life and performance of the probe during storage.

• Each IBP cable should be packed independently. The packaged body temperature probe shall be transportation/stored at where is+5 ° C to + 55 ° C, the relative humidity shall not exceed 80%, and no corrosive gas and good ventilation.

Clean, Disinfect, or sterilize

Non-sterile products.

Can be cleaned and disinfected with 75% medical alcohol. Be careful not to wipe the metal part of the plug to avoid oxidation on the metal surface affecting the performance.

Waste disposal

When the accessories are about to exceed the useful life (expected service life: 2 years), it must be treated in accordance with relevant local laws and regulations or the hospital's rules and regulations.

Warranty Period

the company provides users with free warranty service for 12 months (under normal use conditions since the date of purchase).

Product Description

Company Profile