Feeder Clamp 3 ways 7+9-14mm Professional Outdoor Double Holes Type
This Fiber Optic Cable Clamp is widely used for :
1. Disentwine the special bolt of the C-bracket till the ringent distance is bigger than the thick of one
side of angle iron. And then tighten the special bolt M8; (Reference torque: 15Nm)
2. Please retire the nut onto the threaded rod ,and unclench the plastic clip;
3. Disjoin the plastic clamp,plunge the Fiber cable ofφ7mm orφ7.5mm into the small hole of plastic
clamp, plunge the 3.3 square or 4 square cable into the hole of the black rubber pipe in plastic clamp.
Remove the rubber pipe from the plastic clamp for the 6 square or 8.3 square cable and plunge the
cable into the hole of plastic clamp (figure right);
4. Lock all nuts at last. (Reference torque of lock nut M8 for clamp: 11Nm)
Product Type | fiber & power cable clamp |
Size | 7mm,9-14mm |
Compatible Diameter maximum | 14 mm | 0.55 in |
Compatible Diameter minimum | 7 mm | 0.27 in |
Includes | Angle adapter, plastic clamp, threaded rod, nuts, washer and rubber inserts |
Material of metal part | Stainless steel 304 |
Material of plastic part | PP/PA |
Cables per clamp | 6 |
Salt spray test | 168 h |
Surface treatment | Passivated |
Warranty | 3 years |
Operating Temperature | -40 °C to +85 °C (-40 °F to +185 °F) |
UV Resistance | ≥720 hours |
OEM | Accepted |
Application | Telecom cable installation |
Packaging Details | Plastic bag, Carton, Pallet |
Delivery Time | 3-15 days |