Rosenberger N female to DIN 716 male TEST LOW PIN connector 60S153-K50N1
Rosenberger test LOW PIN connector
60S153-K50N1
-168dbc
Electrical | |
Impedance | 50 Ω |
Frequency Range | 0 - 11 GHz |
Voltage Rating | 1,500 volts peak |
VSWR | MIL-C-39012 straight connectors: 1.3 max 0-11 GHz MIL-C-39012 right angle connectors: 1.35 max 0-11 GHz |
Dielectric Withstanding Voltage | 2,500 volts rms |
Insulation Resistance | 5,000 MΩ minimum |
Center Contact Resistance | 1.0 mΩ |
Outer Contact Resistance | 0.2 mΩ |
RF Leakage | -90 dB minimum at 3 GHz |
Insertion Loss | .15 dB maximum at 10 GHz |
Mechanical | |
Mating | 5/8-24 threaded coupling |
Braid or Jacket Cable Affixment | All crimps: hex braid crimp Clamps: screw-thread nut and braid clamp |
Center Conductor Cable Affixment | Crimp: crimp or solder All others: solder only |
Captivated Contact | All crimps unless specified otherwise |
Cable Retention | Crimps: 60-120 lbs Clamps: 30-70 lbs |
Material | |
Male Contacts | Brass, silver or gold plated |
Female Contacts | Phosphorous bronze or beryllium copper, silver or gold plated |
Other Metal Parts | Brass with ASTROplate® finish; M39012 has silver finish |
Insulators | TFE, copolymer of styrene or glass-TFE (hermetic seal) |
Weatherproof Gaskets | Silicone rubber of synthetic rubber |
Crimp Ferrule | Copper |
Environmental | |
Temperature Range | TFE: -65°C to +165°C |
Weatherproof | All series N with gaskets are weatherproof |
Hermetic Seals | Pass helium leak test of 2x10-8 cc/sec |
Pressurized Shock | Compression seal MIL-STD-202, method 213 |
Vibration | MIL-STD-202, method 204, test condition B |
Moisture Resistance | MIL-STD-202, method 106 |
Corrosion | MIL-STD-202, method 101, test condition B |
Temperature Cycling | MIL-STD-202, method 102, test condition C |
Altitude | MIL-STD-202, method 105, test condition C |
Military | |
MIL-C-39012 MIL-A-55339 |
Where applicable |
1. We focus on RF Connecter & RF Adapter &Cable Assembly &Antenna.
2. We have a vigorous and creative R&D team with the fullest mastery of the core technology.
We commit ourselves to the development of high performance connector production, and
dedicate ourselves to achieving a leading position in connector innovation and production.
3. Our custom RF cable assemblies are built-in and shipped worldwide
4. RF cable assemblies can be produced with many different connector types and custom lengths
depending on your needs and applications
5. If you require a special RF Connector ,RF Adapter or RF Cable assembly configuration not found here,
you can create your own RF cable assembly configuration by calling our sales department.